User’s Manual

2-12 Kapitel 2: BIOS-Informationen
3rd Information: 27-7-1-10-10
WRITE to PRE Delay [Auto]
READ to PRE Delay [Auto]
Kongurationsoptionen: [Auto] [1 DRAM Clocks] [2 DRAM Clocks] [3 DRAM Clocks] [4
DRAM Clocks] [5 DRAM Clocks] [6 DRAM Clocks] [7 DRAM Clocks] [8 DRAM Clocks]
[9 DRAM Clocks] [10 DRAM Clocks] [11 DRAM Clocks] [12 DRAM Clocks] [13 DRAM
Clocks] [14 DRAM Clocks] [15 DRAM Clocks]
PRE to PRE Delay [Auto]
Kongurationsoptionen: [Auto] [1 DRAM Clocks] [2 DRAM Clocks] [3 DRAM Clocks]
ALL PRE to ACT Delay [Auto]
ALL PRE to REF Delay [Auto]
Kongurationsoptionen: [Auto] [1 DRAM Clocks] [2 DRAM Clocks] [3 DRAM Clocks] [4
DRAM Clocks] [5 DRAM Clocks] [6 DRAM Clocks] [7 DRAM Clocks] [8 DRAM Clocks]
[9 DRAM Clocks] [10 DRAM Clocks] [11 DRAM Clocks] [12 DRAM Clocks] [13 DRAM
Clocks] [14 DRAM Clocks] [15 DRAM Clocks]
DRAM Static Read Control [Auto]
Kongurationsoptionen: [Auto] [Disabled] [Enabled]
DRAM Dynamic Write Control [Auto]
Kongurationsoptionen: [Auto] [Disabled] [Enabled]
DRAM Read Training [Auto]
Kongurationsoptionen: [Auto] [Disabled] [Enabled]
DRAM Write Training [Auto]
Kongurationsoptionen: [Auto] [Disabled] [Enabled]
MEM. OC Charger [Auto]
Kongurationsoptionen: [Auto] [Disabled] [Enabled]
Ai Clock Twister [Auto]
Hier können Sie die GRAM-Leistung einstellen. Kongurationsoptionen: [Auto] [Lighter]
[Light] [Moderatet] [Strong] [Stronger]
Ai Transaction Booster [Auto]
Hier können Sie die Systemleistung einstellen. Kongurationsoptionen: [Auto] [Manual]
Das folgende Element wird nur angezeigt, wenn Ai Transaction Booster auf [Manual]
eingestellt ist.
C/P : A1 A2
LVL : 08 08
Common Performance Level [05]
Stellen Sie dieses Element höher ein, um die Kompatibilität zu verbessern, oder niedriger,
um die Leistung zu steigern. Geben Sie die Werte mit den Tasten <+> und <-> ein.
Pull-In of CHA/CHB PH1/2 [Disabled]
Stellen Sie dieses Element auf [Enabled], um die DRAM Kanäle A und B auf Phasen 1
bis 4 zu erhöhen. Die Anzahl der Phasen wird von der DRAM-Frequenz und dem FSB
Strap bestimmt.Kongurationsoptionen: [Disabled] [Enabled]