Manual

4-38 Chapter 4: Software support
Using Drive Xpert function in Express Gate environment
You may use
Drive Xpert
function in Express Gate environment by preparing only
two hard disks.
For Express Gate environment, you need to install Express Gate on a USB ashinstall Express Gate on a USB ash
disk drive using another computer.using another computer.
Follow below instructions to complete the installation:
1. Plug a USB ash disk drive in a
computer with OS already installed.
2. Refer to the Express Gate installationRefer to the Express Gate installation
on page 4-39. Ensure to selectselect
USB
as the target disk volume whenhen
the
Choose target volume
screen
appears.
3. Plug the USB ash disk drive
installed with Express Gate to the
motherboard. Restart the system,
and launch the Express Gate.
Launching Drive Xpert
1. Click to launch the
ASUS Utility Panel
.
Using Drive Xpert function in BIOS setup environment
You may use
Drive Xpert
function in BIOS setup environment. Refer to
section 3.8 Tools menu
for details.
Launch ASUS Utility Panel
•
EZ Backup / Super Speed
might erase all original data in both hard disks.
Ensure that you have back up all your data in your hard disks before using
the Drive Xpert function.
• When the operating system is already installed in one of the hard disks
connected to the SATA_E1 (orange, port 0) or SATA_E2 (white, port 1)
connectors, Drive Xpert cannot be congured for system safety. In this
case, proceed with mode change in BIOS setup environment if necessary.
2. Launch
Drive Xpert
from the
ASUS Utility Panel
. Refer to pages 4-36
and 4-37 for
Drive Xpert
conguration.