User’s Manual
Table Of Contents
- 目錄內容
- 產品介紹
- 1.1 歡迎加入華碩愛好者的行列
- 1.3.1 產品特寫
- 1.3.2 華碩獨家研發功能
- 1.3.3 華碩個性化功能
- 1.3.4 華碩智慧超頻功能
- 1.5.1 主機板的擺放方向
- 1.5.2 螺絲孔位
- 1.5.3 主機板結構圖
- 1.5.4 主機板元件說明
- 1.6.1 安裝中央處理器
- 1.6.2 安裝散熱片和風扇
- 1.7.1 概述
- 1.7.2 記憶體設定
- 1.7.3 安裝記憶體模組
- 1.7.4 取出記憶體模組
- 1.8.1 安裝擴充卡
- 1.8.2 設定擴充卡
- 1.8.3 PCI 擴充卡插槽
- 1.8.4 PCI Express x1 擴充卡插槽
- 1.8.5 PCI Express x16 擴充卡插槽
- 1.10.1 後側面板連接埠
- 1.10.2 內部連接埠
- 1.11.1 安裝作業系統
- 1.11.2 驅動程式及公用程式光碟資訊
- BIOS 資訊
- 2.1 管理、更新您的 BIOS 程式
- 2.1.1 華碩線上更新
- 2.1.2 製作一張開機片
- 2.1.3 使用華碩 EZ Flash 2 更新 BIOS 程式
- 2.1.4 使用 AFUDOS 程式更新 BIOS
- 2.1.5 使用 CrashFree BIOS 3 程式回復 BIOS 程式
- 2.2 BIOS 程式設定
- 2.2.1 BIOS 程式選單介紹
- 2.2.2 程式功能表列說明
- 2.2.3 操作功能鍵說明
- 2.2.4 選單項目
- 2.2.5 次選單
- 2.2.7 設定視窗
- 2.3 主選單(Main Menu)
- 2.3.1 System Time [xx:xx:xx]
- 2.3.2 System Date [Day xx/xx/xxxx]
- 2.3.3 Legacy Diskette A [1.44M, 3.5 in.]
- 2.3.4 SATA 裝置 1~4
- 2.3.5 儲存設定(Storage Configuration)
- 2.3.6 系統資訊
- 2.4.1 JumperFree 設定(JumperFree Configuration)
- 2.4.2 CPU 設定(CPU Configuration)
- 2.4.3 晶片組設定(Chipset)
- 2.4.4 內建裝置設定(OnBoard Devices Configuration)
- 2.4.5 USB 裝置設定(USB Configuration)
- 2.4.6 PCI 即插即用裝置(PCI PnP)
- 2.5.1 Suspend Mode [Auto]
- 2.5.2 ACPI 2.0 Support [Disabled]
- 2.5.3 ACPI APIC Support [Enabled]
- 2.5.4 進階電源管理設定(APM Configuration)
- 2.5.5 系統監控功能(Hardware Monitor)
- 2.6.1 啟動裝置順序(Boot Device Priority)
- 2.6.2 啟動選項設定(Boot Settings Configuration)
- 2.6.3 安全性選單(Security)
- 2.7.1 ASUS EZ Flash 2
- 2.7.2 AI NET 2
華碩 P5QL SE 主機板使用手冊
2-21
2.6 啟動選單(Boot Menu)
本選單可讓您改變系統啟動裝置與相關功能。選擇一個項目並按下 <Enter> 鍵以顯
示次選單。
Boot Device Priority
BootSettingsConguration
Security
SpeciestheBoot
Device Priority
sequence.
Avirtualoppydisk
drive (Floppy Drive
B:) may appear when
you set the CD-ROM
driveastherstboot
device.
BIOS SETUP UTILITY
Main Advanced Power Boot Tools Exit
2.6.1 啟動裝置順序(BootDevicePriority)
1st~xxthBootDevice
本項目讓您從可用裝置中指定啟動裝置的優先順序。螢幕上顯示的裝置項目號取
決於系統中所安裝裝置的數目。設定值有:[1st FLOPPY DRIVE] [Hard Drive] [ATAPI
CD-ROM] [Disabled]
2.6.2 啟動選項設定(BootSettingsConfiguration)
QuickBoot[Enabled]
本選項可讓您決定是否要略過主機板的自我測試功能 (POST),開啟本項目將可加
速開機的時間。當設定為 [Disabled]時,BIOS 程式會執行所有的自我測試功能。設定
值有:[Disabled] [Enabled]
FullScreenLogo[Enabled]
若您要使用個性化開機畫面,請將本項目設設定為 [Enabled]。設定值有:[Disabled]
[Enabled]
若您想使用華碩 MyLogo
TM
功能,請務必將此項設定為 [Enabled]。
AddOnROMDisplayMode[ForceBIOS]
本項目讓您設定選購裝置軔體程式的顯示模式。設定值有:[Fo r ce BI OS] [K e e p
Current]
BootupNum-Lock[On]
本項目讓您設定數字鍵的開機狀態。 設定值有:[Off] [On]
WaitFor‘F1’IfError[Enabled]
若您將本項目設定為 [Enabled],系統在開機過程出現錯誤資訊時,將會等待您按
下[F1] 鍵確保才會繼續進行開機程式。設定值有:[Disabled] [Enabled]
Hit‘DEL’MessageDisplay[Enabled]
若您將本項目設定為 [Enabled],系統在開機過程中會出現 「Press DEL to run Setup」
資訊。設定值有:[Disabled] [Enabled]