Instruction Manual

ASUS P5QL 2-3
To update the BIOS using EZ Flash 2:
1. Insert the oppy disk or the USB ash disk that contains the latest BIOS le to the
oppy disk drive or a USB port, then launch EZ Flash 2 in either of these two ways:
• Press
<Alt> + <F2> during POST to display the following:
2.1.3 ASUS EZ Flash 2 utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS-based
utility.
Download the latest BIOS le from the ASUS website at www.asus.com.
• Enter the BIOS setup program. Go to the Tools menu to select EZ Flash 2 and
press <Enter> to enable it.
2. Press
<Tab> to locate the correct BIOS le. Press <Enter>.
When the correct BIOS le is found, EZ Flash 2 performs the BIOS updating process and
automatically reboots the system when done.
• Only a USB ash disk with FAT 32/16 format and single partition supports the ASUS EZ
Flash 2 utility.
• DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
ASUSTek EZ Flash 2 BIOS ROM Utility V3.24
Current ROM
Update ROM
A:
Note
FLASH TYPE: MXIC 25L8005
PATH: A:\
BOARD: P5QL
VER: 0304 (H:00 B:00)
DATE: 09/01/2008
BOARD: Unknown
VER: Unknown
DATE: Unknown
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [ESC] Exit