Owner manual

III. HARDWARE SETUP
ASUS P5S-B User’s Manual 13
Motherboard Feature Settings
1) KB_UP p. 16 Keyboard Power (Wake) Up (Enable/Disable)
2) DIP 1 – Switch 1 p. 17 VGA Frame Buffer Setting (Shared/Local)
3) DIP 1 – Switch 2 p. 17 Onboard VGA Setting (Enable/Disable)
4) DIP 1 – Switch 3 p. 18 Onboard Audio Setting (Enable/Disable)
5) DIP 1 – Switches 4, 5 p. 18 VIO Setting
6) DIP 2 – Switch 9 p. 19 TV Out Setting (AV/RGB)
7) DIP 2 – Switch 10 p. 19 LCD Setting (Enable/Disable)
8) DIP 2 – Switches 1, 2, 3, 4 p. 20 CPU BUS Frequency Setting
9) DIP 2 – Switch 5 p. 20 Memory Transfer Mode Setting
10) DIP 2 – Switches 6, 7, 8 p. 21 CPU Core:BUS Frequnecy Multiple Setting
11) DIP 1 – Switches 6, 7, 8, 9, 10 p. 23 Voltage Regulator Output Selection
Expansion Slots/Sockets
1) DIMM Sockets p. 25 168-Pin DIMM Memory Expansion Sockets
2) CPU ZIF Socket 7 p. 27 Central Processing Unit (CPU) Socket
3) SLOT 1, SLOT 2 p. 29 16-bit ISA Bus Expansion Slots
*
4) PCI 1, PCI2, PCI3, PCI4 p. 29 32-bit PCI Bus Expansion Slots
*
The onboard hardware monitor uses the address 290H-297H so legacy ISA cards must not
use this address or else conflicts will occur.
External Connectors
1) PS2KB p. 31 AT Keyboard Connector (5-pin Female)
2) FLOPPY p. 31 Floppy Disk Drive Connector (6-pin Female)
3) PARALLEL p. 32 Parallel Port Connector (26-1 pins)
4) COM1/COM2 p. 32 Serial Port Connectors (Two 10-1 pins)
5) FAN p. 33 Cooling Fan Connectors (3 pins)
6) SMB p. 33 SMBus Connector (5-1 pins)
7) PRIMARY/SECOND. IDE p. 34 Primary/Secondary IDE Connector (Two 40-1 pins)
8) IDELED p. 34 IDE Activity LED (2 pins)
9) ATXPWR p. 35 ATX Power Supply Connector (20 pins)
10) PS2PWR p. 35 AT Power Supply Connector (12 pins)
11) USBMIR p. 36 USB, PS/2 Mouse, Infrared Module Connector (18-1 pins)
12) IR p. 36 IrDA-Compliant Infrared Module Connector (5 pins)
13) PWR (PANEL) p. 37 ATX Power Switch/Soft Power Switch Lead (2 pins)
14)
IDELED ( PANEL ) p. 37 IDE Activity LED Lead (2 pins)
15)
PLED ( PANEL ) p. 37 System Power LED Lead (2 pins)
16) RESET (PANEL) p. 37 Reset Switch Lead (2 pins)
17) MLED (PANEL) p. 37 System Message LED (2 pins)
18)
KEYLOCK ( PANEL ) p. 37 Keyboard Lock Switch Lead (2 pins)
19) SPEAKER (PANEL) p. 37 Speaker Output Connector (4 pins)
20) WOLCON p. 38 Wake-On-LAN Activity Connector (3 pins)
Contents
III. H/W SETUP