Owner manual

III. HARDWARE SETUP

ASUS P5S-B User’s Manual 19

Motherboard Settings

III. H/W SETUP

6. LCD Setting (DIP 2 – Switch 10)

If you want to connect an LCD monitor to your computer, you must set this

switch to Enable to use it. See LCD Header in External Connectors for con-

nection information. NOTE: This setting is available only on motherboards with

the optional Digital Flat Panel (DFP) support.

P5S-B LCD Setting

DIP 2

Enable

Disable

(Default)

12345678910

0 1

7. TV Out Setting (DIP 2 – Switch 9)

This lets you select the signal that is inputted to your TV when using the op-

tional TV Out connector. Select AV for a composite input or RGB for an RGB

input. NOTE: This setting is available only on motherboards with the optional

SCART interface support.

P5S-B TV Out (SCART) Setting

DIP 2

RGB

12345678910

0 1