Operation Manual

ASUS P5VDC-TVM 2-7
SATA Channel 2, 3 Master
While entering Setup, the BIOS automatically detects the presence of Serial
ATA devices. There is a separate sub-menu for each SATA device. Select a
device item then press <Enter> to display the SATA device information.
Extended IDE Drive [Auto]
Select [Auto] to automatically detect a SATA hard disk drive. If
automatic detection is successful, Setup program automatically lls
in the correct values for the remaining elds (including Capacity,
Cylinder, Head, Precomp, Landing Zone, Sector) on this sub-menu.
Conguration options: [None] [Auto]
Access Mode [Auto]
Allows the user to select the sector addressing mode. Conguration
options: [Large] [Auto]
Phoenix - Award BIOS CMOS Setup Utility
SATA Channel 2 Master
Select Menu
Item Specic Help
To auto-detect the HDD’s
size, head... on this
channel
: Move Enter:Select +/-/PU/PD:Value F10:Save&Exit ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F9: Optimized Defaults
IDE Auto-Detection [Press Enter]
Extended IDE Drive [Auto]
Access Mode [Auto]
Capacity 20021 MB
Cylinder 38792
Head 16
Precomp 0
Landing Zone 38791
Sector 63
Capacity
Displays the auto-detected hard disk capacity. This item is not
congurable.
Cylinder
Shows the number of the hard disk cylinders. This item is not
congurable.
Before attempting to congure a hard disk drive, make sure you
have the correct conguration information supplied by the drive
manufacturer. Incorrect settings may cause the system to fail to
recognize the installed hard disk.