Operation Manual
2-8 Chapter 2: BIOS setup
Drive A [1.44M, 3.5 in.]
Species the capacity and physical size of diskette drive A. Do not select
[None] if you are using a oppy disk drive. Conguration options: [None]
[1.2M , 5.25 in.] [720K , 3.5 in.] [1.44M, 3.5 in.]
Halt On [All, But Keyboard]
Sets the system to halt on errors according to the system functions
specied in each option. Conguration options: [All Errors] [No Errors]
[All, But Keyboard] [All, But Diskette] [All, But Disk/Key]
After entering the IDE hard disk drive information into the BIOS, use a
disk utility, such as FDISK, to partition and format new IDE hard disk
drives. This is necessary so that you can write or read data from the
hard disk. Make sure to set the partition of the Primary IDE hard disk
drives to active.
Head
Shows the number of the hard disk read/write heads. This item is not
congurable.
Precomp
Shows the number of precomp per track. This item is not congurable.
Landing Zone
Shows the number of landing zone per track. This item is not
congurable.
Sector
Shows the number of sectors per track. This item is not congurable.