Operation Manual

2-14 Chapter 2: BIOS setup
Onboard Serial Port 1 [3F8/IRQ4]
Allows you to set the Serial Port 1 base address.
Conguration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4]
[2E8/IRQ3] [Auto]
Onboard Serial Port 2 [2F8/IRQ3]
Allows you to set the Serial Port 2 base address.
Conguration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4]
[2E8/IRQ3] [Auto]
Onboard Serial Port 1 [3F8/IRQ4]
A l l o w s y o u t o s e t t h e S e r i a l P o r t 1 b a s e a d d r e s s .
Conguration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/
IRQ3] [Auto]
Onboard Serial Port 2 [2F8/IRQ3]
A l l o w s y o u t o s e t t h e S e r i a l P o r t 2 b a s e a d d r e s s .
Conguration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/
IRQ3] [Auto]
Onboard Parallel Port [378/IRQ7]
Allows you to set the base address of the onboard parallel port connector.
Conguration options: [Disabled] [378/IRQ7] [278/IRQ5] [3BC/IRQ7]
Phoenix - Award BIOS CMOS Setup Utility
SuperIO Device
Select Menu
Item Specic Help
S e l e c t S e r i a l P o r t 1
base address.
: Move Enter:Select +/-/PU/PD:Value F10:Save&Exit ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F9: Optimized Defaults
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Serial POrt 2 [2F8/IRQ3]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [ECP]
ECP Mode Use DMA [3]
SuperIO Device
This sub-menu allows you to set the congurations for SuperIO devices.
Select an item then press <Enter> to edit.