Operation Manual
2-18 Chapter 2: BIOS setup
2.8 Other items
2.8.1 Load Optimized Defaults
Allows you to load the optimized defaults.
2.8.2 Set Supervisor Password
Allows you to set the supervisor password. To set a password, press
<Enter>. Type in and conrm the password when prompted.
2.8.3 Set User Password
Allows you to set a user password for access to system after boot-up.
2.8.4 Save & Exit Setup
Once you are nished making your selections, choose this option to ensure
that the values you selected are saved to the CMOS RAM. When you select
this option, a conrmation window appears. Select Yes to save changes and
exit.
2.8.5 Exit Without Saving
Select this option only if you do not want to save the changes that you
made to the Setup program.
Start Up Temperature (ºC) [50]
Allows you to set the fan start-up temperature.
Conguration options: [0] [1] ~ [100]
Full Speed Temperature (ºC) [70]
Allows you to set the threshold temperature before the fan begins running
at full speed. Conguration options: [0] [1] ~ [100]
Start Up PWM [60]
Sets the start-up Pulse Width Modulation (PWM) value when the fan starts
running. Conguration options: [0] [1] ~ [127]
Slope Select PWM/ºC [4 PWM/ºC]
Sets the PWM increase value per degree Celcius to control the fan speed
when the system temperature increases.
Conguration options: [0 PWM/ºC] [1 PWM/ºC] [2 PWM/ºC] [4 PWM/ºC]
[8 PWM/ºC] [16 PWM/ºC] [32 PWM/ºC] [64 PWM/ºC]