User Manual

ASUS P6-M4A3000E 4-5
ASUSTek EZ Flash 2 BIOS ROM Utility V3.44
Current ROM
Update ROM
A:
Note
FLASH TYPE: MXIC 25L8005
PATH: A:\
BOARD:M4A3000E
VER: 0305 (H:00 B:01)
DATE: 01/21/2010
BOARD: Unknown
VER: Unknown
DATE: Unknown
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [ESC] Exit
4.1.2 ASUS EZ Flash 2
The ASUS EZ Flash 2 feature allows you to update the BIOS without using an
OS-based utility.
Before you start using this utility, download the latest BIOS le from the ASUS
website at www.asus.com.
To update the BIOS using EZ Flash 2:
1. Insert the USB ash disk that contains the latest BIOS le to the USB port,
then launch EZ Flash 2 in any of these two ways:
• Press <Alt> + <F2>
during POST.
• Enter the BIOS setup program. Go to the
Tools menu to select EZ Flash
2 and press <Enter> to enable it.
Press
<Tab> to switch between drives until the correct BIOS le is
found.
2. When the correct BIOS le is found, EZ Flash 2 performs the BIOS update
process and automatically reboots the system when done.
• This function supports USB ash disks with FAT 32/16 format and single
partition only.
• DO NOT shut down or reset the system while updating the BIOS to prevent
system boot failure!