P6-P7H55E ASUS PC (Desktop Barebone) User’s Manual
E5455 First Edition V1 March 2010 Copyright © 2010 ASUSTeK Computer Inc. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK Computer Inc. (“ASUS”).
Table of contents Notices........................................................................................................... v Safety information....................................................................................... vi About this guide......................................................................................... vii System package contents........................................................................... ix Chapter 1: System introduction 1.1 Welcome!.........
Table of contents 4.3 4.4 4.5 4.6 4.7 4.8 4.2.5 Sub-menu items............................................................... 4-8 4.2.6 Configuration fields.......................................................... 4-8 4.2.7 Pop-up window................................................................ 4-8 4.2.8 Scroll bar.......................................................................... 4-8 4.2.9 General help....................................................................
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Safety information Electrical safety • To prevent electric shock hazard, disconnect the power cable from the electric outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste. CAUTION: Risk of explosion if the RTC battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Test Data: • Motherboard (ASUSTeK Computer Inc / P7H5510LT / P6-P7H55E / DP_MB), Power Supply (Delta Electronics Inc.
Conventions used in this guide WARNING: Information to prevent injury to yourself when trying to complete a task. AUTION: Information to prevent damage to the components when C trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task. NOTE: Tips and additional information to aid in completing a task. Where to find more information Refer to the following sources for additional information and for product and software updates. 1.
System package contents Check your P6-P7H55E system package for the following items. If any of the items is damaged or missing, contact your retailer immediately. Item description 1. ASUS P6-P7H55E barebone system with • ASUS motherboatd • Power supply unit • ASUS chassis • CPU cooler • Fan duct 2. Cable • AC power cable 3. Support DVD 4.
This chapter gives a general description of the ASUS P6-P7H55E. The chapter lists the system features including introduction on the front and rear panel, and internal components.
1.1 Welcome! Thank you for choosing the ASUS P6-P7H55E! The ASUS P6-P7H55E is an all-in-one barebone system with a versatile home entertainment feature. The system comes in a stylish casing and powered by the ASUS motherboard that supports the Intel® Lynnfield/Clarkdale Dual-Core / Quad-Core processors in the 1156-land package. The system supports up to 8 GB of system memory using DDR3 DIMMs. Highresolution graphics via integrated graphics controller or PCI Express x16 slot, Serial ATA, USB 2.
1. Power button. Press this button to turn the system on. 2. Front panel cover. Push 3. Optical disk drive cover. Push 4. Microphone port. This Mic (pink) port connects a microphone. 5. Headphone port. This Line out (lime) port connects a headphone with a stereo mini-plug. 6. USB 2.0 ports. These Universal Serial Bus 2.0 (USB 2.0) ports are available for connecting USB 2.0 devices such as a mouse, printer, scanner, camera, PDA, and others. 7.
1.3 Rear panel The system rear panel includes the power connector and several I/O ports that allow convenient connection of devices. 2 1 4 6 3 7 5 8 10 9 11 12 14 13 15 Do NOT cover the rear vent , and the ambient temperature is limited up to 35oC to prevent the system from overheating. 1-4 1. Chassis air vent. The vent is for ventilation inside the system chassis. 2. Power supply unit fan vent. This vent is for the PSU fan that provides ventilation inside the power supply unit. 3.
5. Line In port (light blue). This port connects the tape, CD, DVD player, or other audio sources. 6. Line Out port (lime). This port connects a headphone or a speaker. In 4-channel, 6-channel, and 8-channel configuration, the function of this port becomes Front Speaker Out. 7. Microphone port (pink). This port connects a microphone. 8. Side Speaker Out port (gray). This port connects the side speaker in an 8-channel audio configuration. 9. Rear Speaker Out port (black).
12. USB 2.0 ports 1 ~ 4. These 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0 devices. 13. Video Graphics Adapter (VGA) port. This 15-pin port is for a VGA monitor or other VGA-compatible devices. 14. HDMI port. This is a High-Definition Mulltimedia Interface (HDMI) connector, and is HDCP compliant allowing playback of HD DVD, Blu-Rau discs, and other protected content. 15. Expansion slot covers. Remove these covers when installing expansion cards.
1.4 Internal components The illustration below is the internal view of the system when you remove the side cover and the power supply unit. The installed components are labeled for your reference. 4 2 3 1 5 5 6 1. Front panel cover 2. 5.25-inch optical drive bays 3. Hard disk drive bay 4. Power supply unit (under the HDD bay) 5. ASUS motherboard 6. Expansion slot metal brackets 7.
1.5 Qualified Vendors Lists (QVL) DDR3-1333 MHz capability for Lynnfield CPU (2.66 GHz, 2.8 GHz, & 2.93 GHz) Vendor Part No. Size SS/ DS Chip Brand Chip NO. Timing Voltage A-Data AD31333001GOU 1024MB SS A-Data AD30908C8D-151C E0906 - - A-Data AD31333G001GOU 3072MB(Kit of 3) SS - - A-Data AD31333002GOU 2048MB A-Data DS DIMM socket support (Optional) A* B* • • 8-8-8-24 1.651.
DDR3-1333 MHz capability for Lynnfield CPU (2.66 GHz, 2.8 GHz, & 2.93 GHz) Chip NO. Timing A* B* 2048MB(Kit of 2) SS - - 7-7-7-20 1.8V • • OCZ3X1333LV3GK(XMP) 3072MB(Kit of 3) SS - - - 1.6V • • OCZ OCZ3G13334GK 4096MB(Kit of 2) DS - - - 1.7V • • OCZ OCZ3P13334GK 4096MB(Kit of 2) DS - - 7-7-7-20 1.8V • • OCZ OCZ3P1333LV4GK 4096MB(Kit of 2) DS - - 7-7-7-20 1.65V • • OCZ OCZ3P1333LV4GK 4096MB(Kit of 2) DS - - 7-7-7-20 1.
DDR3-1066 MHz capability for Lynnfield CPU (2.66 GHz, 2.8 GHz, & 2.93 GHz) Vendor Part No. Size SS/DS Chip Brand Chip NO. Timing Voltage DIMM socket support (Optional) A* B* Crucial CT12864BA1067.8FF 1024MB SS Micron 9GF22D9KPT 7 - • • Crucial CT25664BA1067.16FF 2048MB DS Micron 9HF22D9KPT 7 - • • ELPIDA EBJ10UE8EDF0-AE-F 1024MB SS ELPIDA J1108EDSE-DJ-F - 1.
DDR3-1333 MHz capability for Clarkdale CPU (2.00 GHz) DIMM socket support (Optional) Vendor Part No. Size SS/ Chip DS Brand Chip NO. Timing Voltage A-Data AD31333001GOU 1024MB SS A-Data AD30908C8D-151C E0906 - - • A-Data AD31333G001GOU 3072MB(Kit of 3) SS - - 8-8-8-24 1.65-1.85V • A-Data AD31333002GOU 2048MB DS A-Data AD30908C8D-151C E0903 - - • A-Data AD31333G002GMU 2048MB DS - - 8-8-8-24 1.65-1.85V • Apacer 78.A1GC6.
DDR3-1333 MHz capability for Clarkdale CPU (2.00 GHz) Size SS/ Chip DS Brand Chip NO. Timing Voltage KINGSTON KVR1333D3N9/1G 1024MB SS KTC D1288JELDPGD9U - - KINGSTON KVR1333D3N9/2G 2048MB DS Qimonda IDSH1G-03A1F1C-13H - 1.5V KINGSTON KVR1333D3N9/4G 4096MB DS Hynix H5TQ2G83AFR -- - Micron MT8JTF12864AZ-1G4F1 1024MB SS Micron 9FF22D9KPT 9 - Micron MT16JTF25664AZ-1G4F1 2048MB DS Micron 9KF27D9KPT 9 - OCZ OCZ3P13332GK 2048MB(Kit of 2) SS - - 7-7-7-20 1.
DDR3-1333 MHz capability for Clarkdale CPU (2.00 GHz) DIMM socket support (Optional) Vendor Part No. Size SS/ Chip DS Brand Chip NO. Timing Voltage A* B* SILICON POWER SP001GBLTU133S01 1024MB SS NANYA NT5CB128M8AN-CG 9 - • • SILICON POWER SP001GBLTU133S02 1024MB SS elixir N2CB1680AN-C6 9 - • • SILICON POWER SP002GBLTU133S02 2048MB DS elixir N2CB1680AN-C6 9 - • • TAKEMS TMS1GB364D081-107EY 1024MB SS - - 7-7-7-20 1.
1-14 Chapter 1: System introduction
Chapter 2 Starting up This chapter helps you power up the system and install drivers and utilities from the support DVD.
2.1 Installing an operating system The barebone system supports Windows® XP/Vista/7 operating systems (OS). Always install the latest OS version and corresponding updates so you can maximize the features of your hardware. Motherboard settings and hardware options vary. Use the setup procedures presented in this chapter for general reference only. Refer to your OS documentation for more information. 2.
2.3.1 Running the support DVD To begin using the support DVD, place the DVD in your optical drive. The DVD automatically displays the Drivers menu if Autorun is enabled in your computer. Click an icon to display support DVD/motherboard information Click an item to install If Autorun is NOT enabled in your computer, browse the contents of the support DVD to locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run the DVD.
2.3.2 Utilities menu The Utilities menu shows the applications and other software that the motherboard supports. ASUS InstAll Installs all of the utilities through the Installation Wizard. ASUS Update Allows you to download the latest version of the BIOS from the ASUS website. Before using the ASUS Update, make sure that you have an Internet connection so you can connect to the ASUS website. ASUS AI Manager Installs the ASUS AI Manager.
Microsoft DirectX 9.0c Installs the Microsoft® DirectX 9.0c driver. The Microsoft DirectX® 9.0c is a multimedia technology that enhances computer graphics and sound. DirectX® improves the multimedia features of you computer so you can enjoy watching TV and movies, capturing videos, or playing games in your computer. Visit the Microsoft website (www.microsoft.com) for updates. 2.3.3 ASUS Contact information Click the Contact tab to display the ASUS contact information.
2.3.4 Other information The icons on the top right corner of the screen give additional information on the motherboard and the contents of the support DVD. Click an icon to display the specified information. Motherboard Info Displays the general specifications of the motherboard. Browse this DVD Displays the support DVD contents in graphical format.
Filelist Displays the contents of the support DVD and a brief description of each in text format.
This chapter gives information about he motherboard that comes with the system. This chapter includes the motherboard layout, jumper settings, and connector locations.
Motherboard layout 3.2 Super I/O LAN1_USB12 USB34 VGA_HDMI AUDIO ALC 887 PCIEX1_1 BUZZER CHA_FAN1 RTL 8111E SB_PWR PCIEX16 SATA3 SATA2 EATXPWR SATA1 Intel® H55 P7H5510LT USB910 USB78 8Mb BIOS SPDIF_OUT DEBUGPORT ICS 954 A4 Lithium Cell CMOS Power LGA1156 DDR3 DIMM_B1 (64bit, 240-pin module) DDR3 DIMM_A1 (64bit, 240-pin module) 33.5cm(13.2in) CLRTC ATX12V CPU_FAN FRONT_ AUD USB56 CR_CON1 F_PANEL 1 Chapter 3: Motherboard info 3-2 Introduction 3.
3.3 1. Jumpers Clear RTC RAM (3-pin CLRTC) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system passwords. CLRTC P7H5510LT 2 2 Normal (Default) Clear RTC 1 3 P7H5510LT Clear RTC RAM To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2.
3.4 1. Connectors Serial ATA connectors (7-pin SATA1, SATA2, SATA3, SATA4) These connectors are for the Serial ATA signal cables for Serial ATA hard disk drives. SATA1 GND RSATA_RXP1 RSATA_RXN1 GND RSATA_TXP1 RSATA_TXN1 GND SATA2 GND RSATA_RXP2 RSATA_RXN2 GND RSATA_TXP2 RSATA_TXN2 GND GND RSATA_RXP3 RSATA_RXN3 GND RSATA_TXP3 RSATA_TXN3 GND SATA3 P7H5510LT P7H5510LT SATA connectors Install the Windows® XP Service Pack 2 or later version before using Serial ATA. 2.
3. Digital Audio connector (4-1 pin SPDIF_OUT) This connector is for the S/PDIF audio module to allow digital sound output. Connect one end of the S/PDIF audio cable to this connector and the other end to the S/PDIF module. +5V SPDIFOUT GND SPDIF_OUT P7H5510LT P7H5510LT Digital audio connector The S/PDIF out module is purchased separately. 4. USB connectors (10-1 pin USB78, USB910, USB1112) These connectors are for USB 2.0 ports.
5. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V) These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.
6. System panel connector (10-1 pin PANEL) This connector supports several chassis-mounted functions. PLED+ PLEDPWR GND PWR LED PWR BTN P7H5510LT F_PANEL IDE_LED+ IDE_LEDGround Reset PIN 1 HD_LED RESET P7H5510LT System panel connector • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.
Chapter 4 BIOS setup This chapter tells how to change system settings through the BIOS Setup menus and describes the BIOS parameters.
4.1 Managing and updating your BIOS BIOS (Basic Input and Output System) stores system settings such as storage device configuration, overclocking settings, advanced power management, and boot device configuration that are needed for system startup in the motherboard CMOS. In normal circumstances, the default BIOS settings apply to most conditions to ensure optimum performance.
4.1.1 ASUS Update ASUS Update is a utility that allows you to manage, save, and update the motherboard BIOS in Windows® environment. • ASUS Update requires an Internet connection either through a network or an Internet Service Provider (ISP). • This utility is available in the support DVD that comes with the motherboard package. Installing ASUS Update To install ASUS Update: 1. Place the support DVD in the optical drive. The Drivers menu appears. 2.
4.1.2 ASUS EZ Flash 2 The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS‑based utility. Before you start using this utility, download the latest BIOS file from the ASUS website at www.asus.com. To update the BIOS using EZ Flash 2: 1. Insert the USB flash disk that contains the latest BIOS file to the USB port, then launch EZ Flash 2 in any of these two ways: • Press + during POST. • Enter the BIOS setup.
4.1.3 ASUS CrashFree BIOS 3 The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can update a corrupted BIOS file using the motherboard support DVD or a USB flash disk that contains the updated BIOS file. • Ensure that you rename the BIOS file in the USB flash disk to P7H55E.ROM.
4.2 BIOS setup program Use the BIOS Setup program to update the BIOS or configure its parameters. The BIOS screens include navigation keys and brief online help to guide you in using the BIOS Setup program. Entering BIOS Setup at startup To enter BIOS Setup at startup: • Press during the Power-On Self-Test (POST). If you do not press , POST continues with its routines.
4.2.1 BIOS menu screen Menu items Main Menu bar Advanced Power Configuration fields General help BIOS SETUP UTILITY Boot Tools Exit System Time System Date Language SATA 1 SATA 2 SATA 3 [5:27:37] [Fri 03/19/2010] [English] Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. :[Not Detected] :[Not Detected] :[Not Detected] Use [+] or [-] to configure system time.
4.2.4 Menu items The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items. The other items (Advanced, Power, Boot, Tool, and Exit) on the menu bar have their respective menu items. 4.2.5 System Time System Date SATA 1 SATA 2 SATA 3 [5:27:37] [Fri 03/19/2010] [Not Detected] [Not Detected] [Not Detected] Storage Configuration System Information v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
4.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. Refer to section “4.2.1 BIOS menu screen” for information on the menu screen items and how to navigate through them. System Time System Date Language [5:27:37] [Fri 03/19/2010] [English] SATA 1 SATA 2 SATA 3 :[Not Detected] :[Not Detected] :[Not Detected] Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system time.
4.3.3 SATA1~3 While entering Setup, the BIOS automatically detects the presence of SATA devices. There is a separate sub-menu for each SATA device. Select a device item then press to display the SATA device information.
DMA Mode [Auto] Selects the DMA mode. Configuration options: [Auto] SMART Monitoring [Auto] Sets the Smart Monitoring, Analysis, and Reporting Technology. Configuration options: [Auto] [Disabled] [Enabled] 32Bit Data Transfer [Enabled] Enables or disables 32-bit data transfer. Configuration options: [Disabled] [Enabled] 4.3.4 Storage Configuration The items in this menu allow you to set or change the configurations for the SATA devices installed in the system.
4.3.5 System Information This menu gives you an overview of the general system specifications. The BIOS automatically detects the items in this menu. BIOS Information Version : 0211 Build Date : 03/22/10 Processor Type : Intel(R) Core(TM)2 CPU 2.67GHz : 2676MHz Speed 750 @ System Memory Usable Size : 991MB BIOS Information Displays the auto-detected BIOS information. Processor Displays the auto-detected CPU specification. System Memory Displays the auto-detected system memory.
4.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. Main Advanced Power BIOS SETUP UTILITY Boot Tools CPU Configuration Uncore Configuration Onboard Devices Configuration USB Configuration PCIPnP Intel VT-d Exit Configure CPU.
C1E Support [Enabled] Allows you to enable or disable Inter CPU Enhanced Halt (C1E) function, a CPU power-saving function in system halt state. When enable, the CPU core frequency and voltage will be reduced during the system halt state to decrease power consumption. Configuration options: [Disabled] [Enabled] Hardware Prefetcher [Enabled] Enables or disables the L2 cache (MLC) Streamer Prefetcher function for tuning the performance of a specific application.
Active Processor Cores [All] Shows the number of cores you can enable in each processor package. Configuration options: [All] [1] [2] A20M [Disabled] Enables or disables legacy operating systems and applications. Configuration options: [Disabled] [Enabled] Intel(R) SpeedStep(TM) Tech [Enabled] Allows you to use the Enhanced Intel® SpeedStep® Technology. When set to [Enabled], you can adjust the system power settings in the operating system to use the EIST feature.
Memory Remap Feature [Enabled] Allows you to enable or disable the remapping of overlapped PCI memory above the total physical memory. Configuration options: [Enabled] [Disabled] The following item appears only when you are using Clarkdale CPU. Initiate Graphic Adapter [iGPU] Allows you to select the graphics controller as the primary boot device.
4.4.3 Onboard Devices Configuration Onboard Devices Configuration HDA Controller Realtek LAN LAN Boot ROM Options [Enabled] [Enabled] [Disabled] Enabled Disabled HDA Controller [Enabled] Enables or disables the HDA controller. Configuration options: [Enabled] [Disabled] Realtek LAN [Enabled] Enables or disables the Realtek LAN controller. Configuration options: [Enabled] [Disabled] The following item appears only when you enable the Realtek LAN controller.
4.4.4 USB Configuration The items in this menu allows you to change the USB-related features. Select an item then press to display the configuration options. USB Configuration Options Module Version - 2.24.3-13.4 Disabled Enabled USB Devices Enabled: None USB Functions Legacy USB Support BIOS EHCI Hand-Off [Enabled] [Auto] [Enabled] USB Mass Storage Device Configuration The Module Version and USB Devices Enabled items show the auto-detected values.
Emulation Type [Auto] Allows you to set the emulation type. Configuration options: [Auto] [Floppy] [Forced FDD] [Hard Disk] [CDROM] 4.4.5 PCI PnP The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices. The menu includes setting IRQ and DMA channel resources for either PCI/PnP or legacy ISA devices, and setting the memory size block for legacy ISA devices. Be cautious when changing the settings of the PCI PnP menu items.
4.5 Power menu The Power menu items allow you to change the settings for the Advanced Power Management (APM). Select an item then press to display the configuration options. Main Advanced Suspend Mode ACPI 2.0 Support ACPI APIC Support Power BIOS SETUP UTILITY Boot Tools [Auto] [Disabled] [Enabled] Exit Select the ACPI state used for System Suspend. APM Configuration Hardware Monitor 4.5.
4.5.4 APM Configuration APM Configuration Restore on AC Power Loss [Power Off] Power On By RTC Alarm WOL [include AC Power Loss) [Disabled] [Disabled] to select whether or not to restart the system after AC power loss. Restore on AC Power Loss [Power Off] When set to [Power Off], the system goes into off state after an AC power loss. When set to [Power On], the system goes on after an AC power loss.
4.5.5 Hardware Monitor Hardware Monitor CPU Temperature CPU Temperature MB Temperature [26ºC/78.5ºF] [28ºC/82ºF] CPU Fan Speed CPU Fan Speed Low Limit CPU Q-Fan Control [4041RPM] [200] [Enabled] Chassis Fan Speed Chassis Q-Fan Control [N/A] [Disabled] CPU Voltage 3.3V Voltage 5V Voltage 12V Voltage [ 1.200V] [ 3.280V] [ 5.145V] [11.932V] Enter F1 F10 ESC Select Screen Select Item Go to Sub-screen General Help Save and Exit Exit v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
4.6 Boot menu The Boot menu items allow you to change the system boot options. Select an item then press to display the sub-menu. Main Advanced Power BIOS SETUP UTILITY Boot Tools Exit Specifies the Boot Device Priority sequence. Boot settings Boot Device Priority A virtual floppy disk drive (Floppy Drive B: ) may appear when you set the CD-ROM drive as the first boot device.
4.6.2 Hard Disk Drives Hard Disk Drives 1st Drive 2nd Drive [USB: JetFlash Trans] [USB: Kingston DataT] 1st /2nd Drive [USB: JetFlash Trans] Specifies the boot sequence from the available devices. Select Screen Select Item +Change Option F1 General Help F10 Save and Exit devices. The number ESC Exit These items specify the boot sequence from the available of device items that appears on the screen depends on the number of devices installed in the system.
Add On ROM Display Mode [Force BIOS] Sets the display mode for option ROM. Configuration options: [Force BIOS] [Keep Current] Bootup Num-Lock [On] Allows you to select the power-on state for the NumLock. Configuration options: [Off] [On] Wait for ‘F1’ If Error [Enabled] When set to [Enabled], the system waits for the F1 key to be pressed when error occurs.
To change the supervisor password, follow the same steps as in setting a user password. To clear the supervisor password, select the Change Supervisor Password then press twice. The message “Password Uninstalled” appears. If you forget your BIOS password, you can clear it by erasing the CMOS Real Time Clock (RTC) RAM. See section “4.3 Jumper” for information on how to erase the RTC RAM. After you have set a supervisor password, the other items appear to allow you to change other security settings.
2. On the password box, key in a password containing up to six letters or numbers, or both, then press . 3. Confirm the password when prompted. The message “Password Installed” appears after you set your password successfully. To change the user password, follow the same steps as in setting a user password. Clear User Password Select this item to clear the user password. Password Check [Setup] When set to [Setup], BIOS checks for user password when accessing the Setup utility.
4.7.1 Main AI NET 2 Advanced Power BIOS SETUP UTILITY Boot Tools Exit AI NET 2 Pair Status Length Check Realtek LAN cable [Disabled] Exit system setup Check Realtek LAN after cablesaving duringthe POST. changes. It will take 3 to 10 F10 key can used seconds to be diagnose for operation. LANthis cable. Check Realtek LAN cable [Disabled] Enables or disables checking of Self‑Test (POST). Configuration 4.7.
4.8 Exit menu The Exit menu items allow you to load the optimal or failsafe default values for the BIOS items, and save or discard your changes to the BIOS items. Main Advanced Power Exit Options Exit & Save Changes Exit & Discard Changes Discard Changes Load Setup Defaults BIOS SETUP UTILITY Boot Tools Exit Exit Exitsystem systemsetup setup after aftersaving savingthe the changes. changes. F10 F10key keycan canbe beused used for forthis thisoperation. operation.
ASUS contact information ASUSTeK Computer Inc. Address Telephone Fax E-mail Web site Technical Support Telephone Online support 15 Li-Te Road, Peitou, Taipei, Taiwan 11259 +886-2-2894-3447 +886-2-2890-7798 info@asus.com.tw www.asus.com.tw +86-21-38429911 support.asus.
