Installation guide

¿ù»~

©|¥¼©w¸q¼Ë¦¡¡C

• Click on "Browse" to locate the Infrared driver from the Driver & Utility CD-ROM disc, the

path is "D:\irda\nsc", then click on "OK".

• Click on "OK" to confirm "Install From Disk".

• Select "OEM Laptop Fast Infrared Port", then click on "OK".

• Specify your Windows 95 CD-ROM disc path, then click on "OK".

• Select "Change Settings", then click on "Next".

• Select the configurations of COM, Interrupt Level, and DMA Channel based on your Generic Ir

Serial Port COM2 setting. The recommended setting is COM2, Interrupt Level 3, DMA

Channel 3.

• Select "IBM or TEMIC" in the Dongle Type, then press "Next".

• Select "Use Default Ports" for simulated serial and parallel ports, then click on "Next".

• Click on "Finish", then click on "OK" to restart your computer.

Step 2. Install Fast IR stack and additional software to support networking:

• After Windows 95 restarted, double-click on "My Computer", double-click on "Control Panel",

double-click on "Network".

• Select "OEM Laptop Fast Infrared Port", click on "Properties", then click on "Advanced" tab.

Make sure you have values on following items: DMA Channel 3, Dongle Type IBM or TEMIC,

Interrupt Level 3, UartloBaseAddress COM2.

• Highlight "OEM Laptop Fast Infrared Port".

• Click on "Add", select "Protocol", then click on "Add".

• Click on "Have Disk".

• Click on "Browse", select folder "\irda", file name "fastir.inf", then click on "OK".

• Click on "OK" to confirm "Install From Disk".

• Click on "OK" to confirm the Fast Infrared Protocol installation, then click on "OK".

• Click on "Identification" tab, and input your computer name and workgroup name, then press

"OK".

• Specify your Windows 95 CD-ROM disc path, then click on "OK".

• Click on "Yes" to reboot your Notebook PC.