Installation guide

¿ù»~

©|¥¼©w¸q¼Ë¦¡¡C

MICROSOFT WINDOWS 98 ENVIRONMENT

It is easy to set up Windows. Please refer to your Microsoft Windows 98 Installation Guide to install Windows 98

Operation System.

Note : Regarding CD-ROM driver in Windows 98, you should use Windows 98's CD-ROM driver

instead of the DOS real-mode CD-ROM driver. A DOS driver has worse performance and

wastes memory, also may cause problems. You can remove the DOS real-mode CD-ROM

driver by doing the following:

1. Remove the "Device=<cdrom>.SYS ..." line in C:\CONFIG.SYS file. (The driver filename

depends on which driver you installed).

2. Remove the "MSCDEX ..." line in C:\AUTOEXEC.BAT file.

Of course, you will need the DOS driver if you start the installation from a blank HDD. You

need this driver to access the Windows 98 CD or our driver CD. That is the reason you need

the CD-ROM's DOS driver during the installation of Windows 98.