Installation guide

¿ù»~

©|¥¼©w¸q¼Ë¦¡¡C

To Format the Hard Disk

• Insert a DOS boot system diskette with "FORMAT" program inside into the floppy drive.

• Type "A:", then press [Enter].

• Type "FORMAT C: /S/U", then press [Enter].

• Type "Y", then press [Enter] to confirm format.

• Enter a Volume label, or just press [Enter] to leave.

To Turn on the Image Expansion at DOS Mode

*This section is optional

EXPANDV utility turns on or off the image expansion at DOS mode.

CENTER utility turns on or off the image centering at DOS mode.

Usage:

EXPANDV ON (to enable expansion)

EXPANDV OFF (to disable expansion)

CENTER ON (to enable centering)

CENTER OFF (to disable centering)

For example :

You can put the EXPANDV.EXE and CENTER.EXE files under C:\UTILITY directory, and then in

AUTOEXEC.BAT file you can add

C:\UTILITY\EXPANDV ON

C:\UTILITY\CENTER ON

to activate the two programs at bootup.