Motherboard P6T6 WS Revolution
E4239 First Edition November 2008 Copyright © 2008 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Contents....................................................................................................... iii Notices........................................................................................................ viii Safety information....................................................................................... ix About this guide........................................................................................... x P6T6 WS Revolution specifications summary.........
Contents 2.7 2.8 Connectors.................................................................................. 2-22 2.7.1 2.7.2 2.10 2.8.1 G.P. Diagnosis card layout............................................. 2-34 2.8.3 G.P. Diagnosis card check codes.................................. 2-35 Turning off the computer............................................................ 2-37 2.10.1 Chapter 3: BIOS setup ASUS Update utility......................................................... 3-1 3.1.
Contents 3.3.6 3.4 3.3.7 3.4.1 Ai Overclock Tuner [Auto].............................................. 3-17 3.4.3 Intel(R) SpeedStep(TM) Tech [Enabled]........................ 3-18 3.4.4 3.4.5 3.4.6 3.4.7 3.4.8. 3.4.9 3.4.10 3.4.11 3.4.12 3.4.13 3.4.14 3.4.15 3.4.16 3.4.17 3.4.18 3.4.19 3.4.20 3.4.21 3.4.22 3.4.23 3.4.24 CPU Ratio Setting [Auto]............................................... 3-18 Intel(R) Turbo Mode Tech [Enabled].............................. 3-18 DRAM Frequency [Auto]............
Contents 3.6.2 Repost Video on S3 Resume [No]................................. 3-32 3.6.4 ACPI APIC Support [Enabled]........................................ 3-32 3.6.3 3.6.5 3.7 3.6.6 Boot Device Priority....................................................... 3-36 3.7.3 Security.......................................................................... 3-38 4.2 3.8.1 ASUS EZ Flash 2........................................................... 3-40 3.8.3 ASUS O.C. Profile.........................
Contents 4.3.10 4.4 4.3.11 4.4.1 RAID definitions............................................................. 4-48 4.4.3 Intel® RAID configurations.............................................. 4-49 4.4.4 4.5.1 Chapter 5: Marvell® SAS RAID configurations................................. 4-57 Creating a RAID driver disk without entering the OS..... 4-66 Creating a RAID driver disk in Windows®...................... 4-66 Multiple GPU technology support ATI CrossFireX™ technology......................
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • • This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Safety information Electrical safety • • • • • • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
About this guide This user guide contains the information you need when installing and configuring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports.
Conventions used in this guide To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task. NOTE: Tips and additional information to help you complete a task.
P6T6 WS Revolution specifications summary CPU LGA1366 socket for Intel® Core™ i7 Processor Extreme Edition / Core™ i7 Processor Supports Intel® Dynamic Speed Technology * Refer to www.asus.com for Intel CPU support list Chipset Intel® X58 / ICH10R NVIDIA® NF200 System Bus Up to 6.4GT/s; Intel® QuickPath Interconnect Memory 6 x DIMM, max. 12GB, DDR3 1600 (O.C.
P6T6 WS Revolution specifications summary Audio ADI® AD2000B 8-channel High Definition Audio CODEC - Supports Jack-Detection, Multi-streaming, and Front Panel Jack-Retasking technology - Coaxial / Optical S/PDIF out ports at back I/O - ASUS Noise Filtering ASUS Special features ASUS Exclusive Features: - ASUS EPU-6 Engine - ASUS True 16+2 Phase Power Design - ASUS AI Nap ASUS Workstation Unique Features: - G.P. Diagnosis card - ASUS SASsaby cards support - ASUS WS Diag.
P6T6 WS Revolution specifications summary Back Panel I/O Ports 1 x PS/2 Keyboard / Mouse combo port 1 x S/PDIF Out (Coaxial + Optical) 2 x External SATA ports 2 x RJ45 ports 6 x USB 2.0/1.
This chapter describes the motherboard features and the new technologies it supports.
Chapter summary 1 1.1 Welcome!....................................................................................... 1-1 1.3 Special features............................................................................. 1-2 1.2 Package contents..........................................................................
1.1 Welcome! Thank you for buying an ASUS® P6T6 WS Revolution motherboard! The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below. 1.2 Package contents Check your motherboard package for the following items. Motherboard ASUS P6T6 WS Revolution I/O modules 1 x 2-port USB 2.
1.3 Special features 1.3.1 Product highlights Green ASUS This motherboard and its packaging comply with the European Union’s Restriction on the use of Hazardous Substances (RoHS). This is in line with the ASUS vision of creating environment-friendly and recyclable products/packagings to safeguard consumers’ health while minimizing the impact on the environment.
SLI and CrossFireX on Demand The motherboard breaks the boundaries to bring you the multi-GPU choice of either 3-Way SLI™ or 2-Way CrossFireX™. Expect a brand-new gaming style you’ve never experienced before! While using 6 PCIe 2.0 x16 slots, three of them could work at x16 link. See page 2-19 for details. SLI support may need BIOS update. Visit www.asus.com for more details. 1.3.2 ASUS Unique features ASUS TurboV Feel the adrenaline rush of real-time OC—now a reality with the ASUS TurboV.
ASUS Workstation Features ASUS Workstation features provide complete support to system maintenance and storage technology. SAS onboard This motherboard provides onboard SAS ports for hard drive upgrade flexibility. Faster, safer and more stable, SAS will provide users with a better choice for storage expansion and upgrade needs. See page 2-26 for details. Diag LED Diag LED checks key components (CPU, DRAM, VGA card, and HDD) in sequence during motherboard booting process.
ASUS EPU-6 Engine The new ASUS EPU—the world’s first power saving engine, has been upgraded to a new 6 engine version, which provides total system power savings by detecting current PC loadings and intelligently moderating power in real-time.
Fan Xpert ASUS Fan Xpert intelligently allows users to adjust both the CPU and chassis fan speed according to different ambient temperature, which is caused by different climate conditions in different geographic regions and system loading. Built-in variety of useful profiles offer flexible controls of fan speed to achieve a quiet and cool environment. See page 4-22 for details. ASUS Crystal Sound This feature can enhance speech-centric applications like Skype, online game, video conference and recording.
ASUS EZ DIY ASUS EZ DIY feature collection provides you easy ways to install computer components, update the BIOS or back up your favorite settings. ASUS Q-Shield The specially designed ASUS Q-Shield provides conductivity to best protect your motherboard against static electricity damage and shields it against Electronic Magnetic Interference (EMI). Without the usual "fingers" present, this new design is convenient and safe to install.
ASUS MyLogo2™ This feature allows you to convert your favorite photo into a 256-color boot logo for a more colorful and vivid image on your screen. See page 4-10 for details. ASUS Multi-language BIOS The multi-language BIOS allows you to select the language of your choice from the available options. The localized BIOS setup menu helps you configure your system easier and faster. See page 3-12 for details.
This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard.
Chapter summary 2 2.1 Before you proceed...................................................................... 2-1 2.3 Central Processing Unit (CPU).................................................... 2-5 2.2 2.4 2.5 Motherboard overview.................................................................. 2-2 System memory.......................................................................... 2-11 Expansion slots........................................................................... 2-17 2.
2.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, before handling components to avoid damaging them due to static electricity. • Hold components by the edges to avoid touching the ICs on them.
2.2 Motherboard overview 2.2.1 Motherboard layout Refer to 2.8 Connectors for more information about rear panel connectors and internal connectors.
2.2.2 Layout contents Connectors/Jumpers/Slots 1. ATX power connectors (24-pin EATXPWR, 8-pin EATX12V) 2. LGA1366 CPU Socket 3. CPU, chassis, and power fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN1-3, 3-pin PWR_FAN) 4. DDR3 DIMM slots 5. CPU / DRAM Bus / QPI DRAM overvoltage settings (3-pin OV_CPU; 3-pin OV_DRAM_Bus; 3-pin OV_QPI_DRAM) 6. Marvell® 88SE6320 SAS RAID connector [black] (7-pin SAS1-2) 7. ICH10R Serial ATA connectors [blue] (7-pin SATA1-6) 8. Standby power LED (SB_PWR) 9.
2.2.3 Placement direction When installing the motherboard, make sure that you place it into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis as indicated in the image below. 2.2.4 Screw holes Place nine (9) screws into the holes indicated by circles to secure the motherboard to the chassis. DO NOT overtighten the screws! Doing so can damage the motherboard.
2.3 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA1366 socket designed for the Intel® Core™ i7 Processor Extreme Edition / Core™ i7 Processor. • Make sure that all power cables are unplugged before installing the CPU. • Connect the chassis fan cable to the CHA_FAN1 connector to ensure system stability. • Upon purchase of the motherboard, make sure that the PnP cap is on the socket and the socket contacts are not bent.
2.3.1 Installing the CPU To install a CPU: 1. Locate the CPU socket on the motherboard. Before installing the CPU, make sure that the cam box is facing towards you and the load lever is on your left. 2. Press the load lever with your thumb (A), then move it to the left (B) until it is released from the retention tab. To prevent damage to the socket pins, do not remove the PnP cap unless you are installing a CPU. 3. 4. Lift the load lever in the direction of the arrow to a 135º angle.
5. Remove the PnP cap from the CPU socket. PnP cap 6. Position the CPU over the socket, making sure that the gold triangle is on the bottom‑left corner of the socket, and then fit the socket alignment key into the CPU notch. The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU! Gold triangle mark CPU notch Alignment key 7.
8. Close the load plate (A), and then push the load lever (B) until it snaps into the retention tab.
2.3.2 Installing the CPU heatsink and fan The Intel® LGA1366 processor requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. • When you buy a boxed Intel® processor, the package includes the CPU fan and heatsink assembly. If you buy a CPU separately, make sure that you use only Intel®‑certified multi‑directional heatsink and fan. • Your Intel® LGA1366 heatsink and fan assembly comes in a push-pin design and requires no tool to install.
3. Connect the CPU fan cable to the connector on the motherboard labeled CPU_FAN. DO NOT forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector. 2.3.3 Uninstalling the CPU heatsink and fan To uninstall the CPU heatsink and fan: 1. 2. 3. 4. 2-10 Disconnect the CPU fan cable from the connector on the motherboard. Rotate each fastener counterclockwise.
2.4 System memory 2.4.1 Overview The motherboard comes with six Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) sockets. A DDR3 module has the same physical dimensions as a DDR2 DIMM but is notched differently to prevent installation on a DDR2 DIMM socket. DDR3 modules are developed for better performance with less power consumption.
2.4.2 Memory configurations You may install 1GB and 2GB non‑ECC, unbuffered DDR3 DIMMs into the DIMM sockets. 2-12 • You may install varying memory sizes in Channel A, Channel B and Channel C. The system maps the total size of the lower-sized channel for the dual-channel or triple-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation. • Due to Intel spec definition, X.M.P. DIMMs and DDR3-1600 are supported for one DIMM per channel only.
2.4.3 Installing a DIMM Make sure to unplug the power supply before adding or removing DIMMs or other system components. Failure to do so may cause severe damage to both the motherboard and the components. 1. 2. 2 Unlock a DIMM socket by pressing the retaining clips outward. DIMM notch Align a DIMM on the socket such that the notch on the DIMM matches the break on the socket. 1 1 Unlocked retaining clip A DIMM is keyed with a notch so that it fits in only one direction.
P6T6 WS Revolution Motherboard Qualified Vendors Lists (QVL) DDR3-1600MHz capability Vendor Part No. Size P/N:TWIN3X2048-1600C7DHXIN 2048MB (Kit of 2) CORSAIR Box (CM3X1024-1600C7DHXIN)(XMP) CORSAIR BoxP/N:TW3X4G1600C9DHXNV (CM3X2G1600C9DHXNV) 2-14 SS/DS Chip No.
P6T6 WS Revolution Motherboard Qualified Vendors Lists (QVL) DDR3-1333MHz capability DIMM socket support (Optional) Vendor Part No. Size SS/DS Chip No.
P6T6 WS Revolution Motherboard Qualified Vendors Lists (QVL) DDR3-1066MHz capability Vendor Part No. Size SS/DS Chip No. CL Chip Brand DIMM socket support (Optional) A* B* C* D* A-DATA M3OEL3G3I4130A1B5Z 1024MB DS J5308BASE-AE-E-S N/A ELPIDA CORSAIR CM3X1024-1066C7 1024MB DS Heat-Sink Package 7 N/A V V V Crucial CT12864BA1067.8SFB 1024MB SS Z9HWQ 7 MICRON V V V V crucial CT12864BA1067.8SFD 1024MB SS D9JNL 7 MICRON V V V V Crucial CT25664BA1067.
2.5 Expansion slots In the future, you may need to install expansion cards. The following sub‑sections describe the slots and the expansion cards that they support. Make sure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. 2.5.1 Installing an expansion card To install an expansion card: 1. 2. 3. 4. 5. 6.
2.5.
2.5.4 PCI Express 2.0 x16 slots This motherboard has six PCI Express 2.0 x16 slots that support PCI Express x16 2.0 graphic cards complying with the PCI Express specifications. Refer to the figure below for the location of the slots. PCIe 2.0 x16_6 slot (at x4 mode) PCIe 2.0 x16_1 slot (at x16 or x8 mode) PCIe 2.0 x16_2 slot (at x8 mode) PCIe 2.0 x16_5 slot (at x16 mode) PCIe 2.0 x16_4 slot (at x8 mode) PCIe 2.0 x16_3 slot (at x16 or x8 mode) • In single VGA card mode, use first the PCIe 2.
2.6 1. Jumpers Clear RTC RAM (CLRTC) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system passwords. To erase the RTC RAM 1. 2. 3. 4. Turn OFF the computer and unplug the power cord. Move the jumper cap from pins 1-2 (default) to pins 2-3.
2. CPU / DRAM Bus / QPI DRAM overvoltage setting (3-pin OV_CPU, 3-pin OV_DRAM_BUS, 3-pin OV_QPI_DRAM) These jumpers allow you to enable or disable the advanced CPU, DRAM Bus, and QPI DRAM overvoltage settings in BIOS. Read the following information before you change the jumper settings. OV_CPU OV_DRAM_BUS OV_QPI_DRAM Pins 1-2 (Default) up to 1.70V up to 1.90V up to 1.70V Pins 2-3 (OV Enabled) up to 1.9V up to 2.46V up to 1.
2.7 Connectors 2.7.1 Rear panel connectors 1. 2. 3. 4. 5. PS/2 keyboard / mouse combo port. This port is for a PS/2 keyboard or a PS/2 mouse. Coaxial S/PDIF Out port. This port connects an external audio output device via a coaxial S/PDIF cable. LAN 2 (RJ-45) port. This Marvell® LAN port allows Gigabit connection to a Local Area Network (LAN) through a network hub. Refer to the table below for the LAN port LED indications. LAN 1 (RJ-45) port.
8. 9. Line Out port (lime). This port connects a headphone or a speaker. In 4-channel, 6-channel, and 8-channel configuration, the function of this port becomes Front Speaker Out. Microphone port (pink). This port connects a microphone. 10. Side Speaker Out port (gray). This port connects the side speakers in an 8-channel audio configuration. Refer to the audio configuration table below for the function of the audio ports in 2, 4, 6, or 8-channel configuration.
2.7.2 1. Internal connectors TPM connector (20-1 pin TPM) [Optional] This connector supports a Trusted Platform Module (TPM) system, which can securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protects digital identities, and ensures platform integrity. The TPM module is purchased separately.
2. ICH10R Serial ATA connectors (7-pin SATA 1-6 [blue]) These connectors are for the Serial ATA signal cables for Serial ATA hard disk drives and optical disc drives. If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Matrix Storage Technology through the onboard Intel® ICH10R RAID controller. • These connectors are set to Standard IDE mode by default.
3. Marvell® 88SE6320 SAS RAID connectors [black] (7-pin SAS1-2) These connectors are for SAS (Serial Attached SCSI) signal cables that support SAS hard disk drives. To configure RAID 0 or RAID 1, install two SAS hard disk drives to these two connectors. • When ICH10R SATA ports are set to RAID or AHCI mode, SAS HDDs can be detected in Windows environment only. • Please install the Marvell® Controller driver before using the yellow SAS RAID connectors (SAS1-2). See section 4.2.
4. USB connectors (10-1 pin USB78, USB910, USB1112) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed. Never connect a 1394 cable to the USB connectors.
5. CPU, chassis and power fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN1-3, 3-pin PWR_FAN) The fan connectors support cooling fans of 350 mA ~ 2000 mA (24 W max.) or a total of 1 A ~ 7 A (84 W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components.
6. Chassis intrusion connector (4-1 pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. By default , the pin labeled “Chassis Signal” and “Ground” are shorted with a jumper cap.
8. ATX power connectors (24-pin EATXPWR, 8-pin EATX12V) These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. • For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 600 W.
9. Optical drive audio connector (4-pin CD) This connector allows you to receive stereo audio input from sound sources such as a CD-ROM, TV tuner, or MPEG card. 10. Digital audio connector (4-1 pin SPDIF_OUT) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s). If you are using ASUS HDMI-equipped graphics card, connect the HDMI card to this connector with a S/PDIF out cable. The S/PDIF out cable is purchased separately.
11. System panel connector (20-8 pin PANEL) This connector supports several chassis-mounted functions. 2-32 • System power LED (2-pin PLED) • Hard disk drive activity LED (2-pin IDE_LED) • System warning speaker (4-pin SPEAKER) • ATX power button/soft-off button (2-pin PWRSW) • Reset button (2-pin RESET) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector.
ASUS Q-Connector (system panel) You can use the ASUS Q-Connector to connect/disconnect chassis front panel cables in a few steps. Refer to the instructions below to install the ASUS Q-Connector. 1. Connect the front panel cables to the ASUS Q-Connector. Refer to the labels on the Q-Connector to know the detailed pin definitions, then match them to the respective front panel cable labels. 2.
2.8 G.P. Diagnosis card installation 2.8.1 G.P. Diagnosis card layout LED 0 and 1 Power Switch. Press to turn ON or OFF the computer. Reset Button. Press to restart the computer. Card connector 2.8.2 Installing G.P. Diagnosis card Make sure to turn off the power supply unit before installing the diagnosis card to avoid electrical shock hazard. 2-34 1. Locate the TPM connector (20-1 pin TPM) on the motherboard. 2.
2.8.3 G.P.
2.9 Starting up for the first time 1. After making all the connections, replace the system case cover. 3. Connect the power cord to the power connector at the back of the system chassis. 2. 4. 5. Be sure that all switches are off. Connect the power cord to a power outlet that is equipped with a surge protector. Turn on the devices in the following order: a. Monitor c. System power b. 6.
2.10 Turning off the computer 2.10.1 Using the OS shut down function If you are using Windows® Vista™: 1. 2. Click the Start button then select Shut Down. The power supply should turn off after Windows® shuts down. If you are using Windows® XP: 1. 2. 3. Click the Start button then select Turn Off Computer. Click the Turn Off button to shut down the computer. The power supply should turn off after Windows® shuts down. 2.10.
2-38 Chapter 2: Hardware information
This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.
Chapter summary 3 3.1 Managing and updating your BIOS............................................. 3-1 3.3 Main menu................................................................................... 3-12 3.2 3.4 BIOS setup program..................................................................... 3-9 Ai Tweaker................................................................................... 3-17 3.5 Advanced menu..........................................................................
3.1 Managing and updating your BIOS The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup. 1. ASUS Update (Updates the BIOS in Windows® environment.) 3. AFUDOS (Updates the BIOS using a bootable floppy disk) ASUS EZ Flash 2 (Updates the BIOS using a floppy disk or USB flash disk.) 2. ASUS CrashFree BIOS 3 (Updates the BIOS using a bootable floppy disk, USB flash disk or the motherboard support DVD when the BIOS file fails or gets corrupted.
Quit all Windows® applications before you update the BIOS using this utility. Updating the BIOS through the Internet To update the BIOS through the Internet: 3-2 1. Launch the ASUS Update utility from the Windows® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update main window appears. 2. Select Update BIOS from the Internet option from the drop‑down menu, then click Next. 3. Select the ASUS FTP site nearest you to avoid network traffic, or click Auto Select.
4. 5. From the FTP site, select the BIOS version that you wish to download. Click Next. Follow the screen instructions to complete the update process. The ASUS Update utility is capable of updating itself through the Internet. Always update the utility to avail all its features. Updating the BIOS through a BIOS file To update the BIOS through a BIOS file: 1. Launch the ASUS Update utility from the Windows® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate.
3.1.2 ASUS EZ Flash 2 utility The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go through the long process of booting from a floppy disk and using a DOS‑based utility. The EZ Flash 2 utility is built-in the BIOS chip so it is accessible by pressing + during the Power-On Self Tests (POST). To update the BIOS using EZ Flash 2 1. 2. 3. Visit the ASUS website (www.asus.com) to download the latest BIOS file for the motherboard.
3.1.3 Creating a bootable floppy disk The motherboard does not provide a floppy drive connector. You have to use a USB floppy drive when creating a bootable floppy disk. 1. Do either one of the following to create a bootable floppy disk. DOS environment a. Insert a 1.44MB floppy disk into the drive. b. At the DOS prompt, type format A:/S then press . Windows® XP environment a. Insert a 1.44 MB floppy disk to the floppy disk drive. b. Click Start from the Windows® desktop, then select My Computer.
3.1.4 AFUDOS utility The AFUDOS utility allows you to update the BIOS file in DOS environment using a bootable floppy disk with the updated BIOS file. This utility also allows you to copy the current BIOS file that you can use as backup when the BIOS fails or gets corrupted during the updating process. The motherboard does not provide a floppy drive connector. You have to use a USB floppy drive to use the AFUDOS utility.
Write the BIOS filename on a piece of paper. You need to type the exact BIOS filename at the DOS prompt. 2. 3. Copy the AFUDOS utility (afudos.exe) from the motherboard support DVD to the bootable floppy disk you created earlier. Boot the system in DOS mode, then at the prompt type: afudos /i[filename] where [filename] is the latest or the original BIOS file on the bootable floppy disk. A:\>afudos /iP6T6WS.ROM 4. The utility verifies the file and starts updating the BIOS. A:\>afudos /iP6T6WS.
3.1.5 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file when it fails or gets corrupted during the updating process. You can update a corrupted BIOS file using the motherboard support DVD, the floppy disk, or the USB flash disk that contains the updated BIOS file. Prepare the motherboard support DVD, the floppy disk or the USB flash disk containing the updated motherboard BIOS before using this utility.
3.2 BIOS setup program This motherboard supports a programmable firmware chip that you can update using the provided utility described in section 3.1 Managing and updating your BIOS. Use the BIOS Setup program when you are installing a motherboard, reconfiguring your system, or prompted to “Run Setup.” This section explains how to configure your system using this utility. Even if you are not prompted to use the Setup program, you can change the configuration of your computer in the future.
3.2.1 BIOS menu screen Menu items Menu bar Configuration fields General help BIOS SETUP UTILITY Main Ai Tweaker Advanced Power Boot Tools Exit System Time System Date Language SATA1 SATA2 SATA3 SATA4 SATA5 SATA6 [13:51:25] [Thu 10/16/2008] [English] Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. [HDT722516DLA380] [Not Detected] [ATAPI DVD DH1] [Not Detected] [Not Detected] [Not Detected] Use [+] or [-] to configure the System Time.
3.2.4 Menu items The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items. The other items (Advanced, Power, Boot, and Exit) on the menu bar have their respective menu items. 3.2.5 System Time System Date Language Use [ENTER], [TAB], or [SHIFT-TAB] to select a field. [11:56:54] [Thu 10/16/2008] [English] SATA1 SATA2 SATA3 SATA4 SATA5 SATA6 [Not [Not [Not [Not [Not [Not Use [+] or [-] to configure system Time.
3.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. Refer to section 3.2.1 BIOS menu screen for information on the menu screen items and how to navigate through them. BIOS SETUP UTILITY Main Ai Tweaker Advanced Power Boot Tools Exit System Time System Date Language SATA1 SATA2 SATA3 SATA4 SATA5 SATA6 [11:55:25] [Thu 10/02/2008] [English] Use [ENTER], [TAB] or [SHIFT-TAB] to select a field.
3.3.4 SATA 1-6 While entering Setup, the BIOS automatically detects the presence of Serial ATA devices. There is a separate sub-menu for each SATA device. Select a device item then press to display the SATA device information. BIOS SETUP UTILITY Main SATA 1 Device : Hard Disk Vendor : HDT722516DLA380 Size : 164.
DMA Mode [Auto] Selects the DMA mode. Configuration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5] SMART Monitoring [Auto] Sets the Self-Monitoring, Analysis, and Reporting Technology. Configuration options: [Auto] [Disabled] [Enabled] 32Bit Data Transfer [Enabled] Enables or disables 32-bit data transfer. Configuration options: [Disabled] [Enabled] 3.3.
Hard Disk Write Protect [Disabled] Disables or enables device write protection. This will be effective only if the device is accessed through BIOS. Configuration option: [Disabled] [Enabled] IDE Detect Time Out (Sec) [35] Selects the time out value for detecting ATA/ATAPI devices. Configuration options: [0] [5] [10] [15] [20] [25] [30] [35] 3.3.6 AHCI Configuration This menu is the section for AHCI configuration.
3.3.7 System Information This menu gives you an overview of the general system specifications. The BIOS automatically detects the items in this menu. BIOS SETUP UTILITY Main Bios Information Version : 0201 Build Date : 10/09/08 Processor Type : Genuine Intel(R) CPU @ 2.67GHz Speed : 2666MHz System Memory Usable Size : 1016MB Select Screen Select Item F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
3.4 Ai Tweaker menu The Ai Tweaker menu items allow you to configure overclocking-related items. Take caution when changing the settings of the Ai Tweaker menu items. Incorrect field values can cause the system to malfunction. The default values of the following items vary depending on the CPU and memory modules you install on the motherboard.
The configuration options for the following sub-item vary depending on the DIMMs you install on the motherboard. DRAM O.C. Profile [DDR3-1339MHz] This item appears only when you set the Ai Overclock Tuner item to [D.O.C.P.] and allows you to select a DRAM O.C. profile, which applies different settings to DRAM frequency, DRAM timing and DRAM voltage.
3.4.5 DRAM Frequency [Auto] Allows you to set the DDR3 operating frequency. Configuration options: [Auto] [DDR3-800MHz] [DDR3-1066MHz] The DRAM Frequency configuration options vary with the BCLK Frequency item settings. Selecting a very high DRAM frequency may cause the system to become unstable! If this happens, revert to the default setting. 3.4.6 UCLK Frequency [Auto] Allows you to set the Uncore Clock Ratio (UCLK).
DRAM REF Cycle Time [Auto] Configuration options: [Auto] [30 DRAM Clock] [36 DRAM Clock] [48 DRAM Clock] [60 DRAM Clock] [72 DRAM Clock] [82 DRAM Clock] [88 DRAM Clock] [90 DRAM Clock] [100 DRAM Clock] [110 DRAM Clock] DRAM WRITE Recovery Time [Auto] Configuration options: [Auto] [1 DRAM Clock] – [15 DRAM Clock] DRAM READ to PRE Time [Auto] Configuration options: [Auto] [1 DRAM Clock] – [15 DRAM Clock] DRAM FOUR ACT WIN Time [Auto] Configuration options: [Auto] [1 DRAM Clock] – [31 DRAM Clock] DRAM WRITE to
DRAM READ to READ Delay(DD) [Auto] Configuration options: [Auto] [2 DRAM Clock] – [9 DRAM Clock] DRAM READ to READ Delay(DR) [Auto] Configuration options: [Auto] [2 DRAM Clock] – [9 DRAM Clock] DRAM READ to READ Delay(SR) [Auto] Configuration options: [Auto] [4 DRAM Clock] [6 DRAM Clock] DRAM WRITE to WRITE Delay(DD) [Auto] Configuration options: [Auto] [2 DRAM Clock] – [9 DRAM Clock] DRAM WRITE to WRITE Delay(DR) [Auto] Configuration options: [Auto] [2 DRAM Clock] – [9 DRAM Clock] DRAM WRITE to WRITE Delay
3.4.12 IOH Voltage [Auto] Allows you to set the I/O Hub (IOH) voltage. The values range from 1.10V to 1.70V with a 0.02V interval. 3.4.13 IOH PCIE Voltage [Auto] Allows you to set the IOH PCIE voltage. The values range from 1.50V to 2.76V with a 0.02V interval. 3.4.14 ICH Voltage [Auto] Allows you to set the I/O Controller Hub (ICH) voltage. The values range from 1.10V to 1.40V with a 0.10V interval. 3.4.15 ICH PCIE Voltage [Auto] Allows you to set the SB PCIE voltage. The values range from 1.
Blue Yellow Purple Red CPU Voltage 0.85000V– 1.22500V 1.23125V– 1.29375V 1.30000V– 1.35000V 1.35625V 1.70000V CPU PLL Voltage 1.80V–1.90V 1.92V–2.00V 2.02V–2.10V 2.12V–2.50V QPI/DRAM Core Voltage 1.20000V– 1.26875V 1.27500V– 1.32500V 1.33125V– 1.40000V 1.40625V– 1.70000V IOH Voltage 1.10V–1.18V 1.20V–1.24V 1.26V–1.30V 1.32V–1.70V IOH PCIE Voltage 1.50V–1.58V 1.60V–1.66V 1.68V–1.74V 1.76V–2.76V ICH Voltage 1.10V–1.20V 1.30V–1.40V N/A N/A ICH PCIE Voltage 1.50V–1.60V 1.
3.4.22 CPU Spread Spectrum [Auto] Set to [Disabled] to enhance BCLK overclocking ability or [Auto] for EMI control. Configuration options: [Auto] [Disabled] [Enabled] 3.4.23 IOH Clock Skew [Auto] Adjusting this item may help enhancing BCLK overclocking ability. You may need to adjust the CPU Clock Skew item at the same time. Configuration options: [Auto] [Normal] [Delay 100ps]–[Delay 1500ps] 3.4.
3.5 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Take caution when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction. BIOS SETUP UTILITY Main Ai Tweaker Advanced Power Boot Tools Exit CPU Configuration Chipset Onboard Devices Configuration USB Configuration PCIPnP Configure CPU.
CPU Ratio Setting [Auto] Allows you to adjust the ratio between CPU Core Clock and BCLK Frequency. Use the <+> and <-> keys to adjust the value. The valid value ranges differently according to your CPU model. C1E Support [Enabled] Allows you to enable or disable Enhanced Halt State support. Configuration options: [Disabled] [Enabled] Hardware Prefetcher [Enabled] Allows you to enable or disable the Hardware Prefetcher function.
Intel(R) SpeedStep (TM) Tech [Enabled] When set to [Disabled], the CPU runs at its default speed. When set to [Enabled], the CPU speed is controlled by the operating system. Configuration options: [Disabled] [Enabled] Intel(R) TurboMode tech [Enabled] Turbo mode allows processor cores to run faster than marked frequency in specific condition. Configuration options: [Disabled] [Enabled] Intel(R) C-STATE Tech [Disabled] The Intel® C-State Technology allows the CPU to save more power under idle mode.
3.5.2 Chipset The Chipset menu allows you to change the advanced chipset settings. Select an item then press to display the sub-menu. BIOS SETUP UTILITY Advanced Advanced Chipset Settings WARMING: Setting wrong values in below sections may cause system to malfunction. Configure North Bridge features.
3.5.3 Onboard Device Configuration BIOS SETUP UTILITY Advanced Onboard Devices Configuration High Definition Audio Front Panel Type Marvell Storage Controller Marvell Storage Boot ROM Marvell SAS SAS Boot ROM Realtek LAN1 Realtek LAN2 LAN Boot ROM Options [Enabled] [HD Audio] [Legacy Mode] [Disabled] [Enabled] [Enabled] [Enabled] [Enabled] [Disabled] Enabled Disabled High Definition Audio [Enabled] Allows you to enable or disable the High Definition Audio Controller.
3.5.4 USB Configuration The items in this menu allows you to change the USB-related features. Select an item then press to display the configuration options. BIOS SETUP UTILITY Advanced USB Configuration USB Devices Enabled: 1 Mouse USB Functions USB 2.0 Controller USB 2.0 Controller Mode BIOS EHCI Hand-Off Legacy USB Support [Enabled] [Enabled] [HiSpeed] [Enabled] [Auto] Enables support for legacy USB. AUTO option disables legacy support if no USB devices are connected.
3.5.5 PCIPnP The PCIPnP menu items allow you to change the advanced settings for PCI/PnP devices. BIOS SETUP UTILITY Advanced Advanced PCI/PnP Settings WARNING: Setting wrong values in below sections may cause system to malfunction. Plug And Play O/S [No] NO: lets the BIOS configure all the devices in the system. YES: lets the operating system configure Plug and Play (PnP) devices not required for boot if your system has a Plug and Play operating system.
3.6 Power menu The Power menu items allow you to change the settings for the Advanced Power Management (APM). Select an item then press to display the configuration options. BIOS SETUP UTILITY Main Ai Tweaker Advanced Power Boot Tools Exit Suspend Mode Repost Video on S3 Resume ACPI 2.0 Support ACPI APIC Support [Auto] [No] [Disabled] [Enabled] Select the ACPI state used for System Suspend.
3.6.5 APM Configuration BIOS SETUP UTILITY Power APM Configuration Restore on AC Power Loss [Power Off] Power Power Power Power [Disabled] [Disabled] [Disabled] [Disabled] On On On On By By By By RTC Alarm PCI Devices PCIE Devices PS/2 Keyboard to select whether or not to restart the system after AC power loss. Select Screen Select Item Option F1 General Help F10 Save and Exit ESC Exit +- Change v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
3.6.6 Hardware Monitor BIOS SETUP UTILITY Power Hardware Monitor CPU Temperature MB Temperature [42.5ºC/108.5ºF] [36ºC/96.5ºF] CPU Fan Speed CPU Q-Fan Control [2057RPM] [Disabled] Chassis Chassis Chassis Chassis [N/A] [N/A] [N/A] [Disabled] Fan 1 Fan 2 Fan 3 Q-Fan Speed Speed Speed Control Power Fan Speed [N/A] CPU Voltage 3.3V Voltage 5V Voltage 12V Voltage [ 1.176V] [ 3.168V] [ 5.022V] [11.
Chassis Q-Fan Control [Disabled] Allows you to enable or disable the Chassis Q-fan control feature. Configuration options: [Disabled] [Enabled] The following item appears only when you enable the Chassis Q-Fan Control item. Chassis Fan Profile [Standard] Allows you to set the appropriate performance level of the ASUS Q-Fan. When set to [Standard], the chassis fan automatically adjusts depending on the chassis temperature.
3.7 Boot menu The Boot menu items allow you to change the system boot options. Select an item then press to display the sub-menu. BIOS SETUP UTILITY Main Ai Tweaker Advanced Power Boot Tools Exit Specifies the Boot Device Priority sequence. Boot Settings Boot Device Priority Boot Settings Configuration Security A virtual floppy disk drive (Floppy Drive B: ) may appear when you set the CD-ROM drive as the first boot device.
3.7.2 Boot Settings Configuration BIOS SETUP UTILITY Boot Boot Settings Configuration Quick Boot Full Screen Logo AddOn ROM Display Mode Bootup Num-Lock Wait for ‘F1’ if Error Hit ‘DEL’ Message Display [Enabled] [Enabled] [Force BIOS] [On] [Enabled] [Enabled] Allows BIOS to skip certain tests while booting. This will decrease the time needed to boot the system.
3.7.3 Security The Security menu items allow you to change the system security settings. Select an item then press to display the configuration options. BIOS SETUP UTILITY Boot Security Settings Supervisor Password : Not Installed User Password : Not Installed to change password. again to disabled password.
BIOS SETUP UTILITY Boot Security Settings Supervisor Password : Installed User Password : Installed Change Supervisor Password User Access Level Change User Password Clear User Password Password Check to change password. again to disabled password. [Full Access] [Setup] User Access Level [Full Access] This item allows you to select the access restriction to the Setup items.
3.8 Tools menu The Tools menu items allow you to configure options for special functions. Select an item then press to display the sub-menu. BIOS SETUP UTILITY Main Ai Tweaker Advanced Power Boot Tools Exit ASUS EZ Flash 2 Express Gate Enter OS Timer Reset User Data [Enabled] [10 Seconds] [No] Press ENTER to run the utility to select and update BIOS. This utility doesn't support : 1.NTFS format ASUS O.C.
3.8.2 Express Gate [Enabled] Allows you to enable or disable the ASUS Express Gate feature. The ASUS Express Gate feature is a unique instant-on environment that provides quick access to the Internet browser and Skype. Refer to section 4.3.10 ASUS Express GATE for details. Configuration options: [Enabled] [Disabled] Enter OS Timer [10 Seconds] Sets countdown duration that the system waits at the Express Gate’s first screen before starting Windows or other installed OS.
3.8.3 ASUS O.C. Profile This item allows you to store or load multiple BIOS settings. BIOS SETUP UTILITY Tools O.C. PROFILE Configuration O.C. Profile 1 Status O.C. Profile 2 Status : Default-Profile : Default-Profile Add Your CMOS Profile. Name : Save To : Load CMOS Profile. Load From : Save BIOS settings to Profile 1 [Default-Profile] [Uninstalled] [Blank] Start O.C. Profile Add Your CMOS Profile. Allows you to save the current BIOS file to the BIOS Flash.
3.8.4 Ai Net 2 BIOS SETUP UTILITY Tools Check Marvell LAN cable during POST. AI NET 2 Pair Status Length Check Realtek LAN cable [Disabled] v02.61 (C)Copyright 1985-2008, American Megatrends, Inc. Check Realtek LAN Cable [Disabled] Enables or disables checking of the Realtek LAN cable during the Power-On Self‑Test (POST).
3.9 Exit menu The Exit menu items allow you to load the optimal or failsafe default values for the BIOS items, and save or discard your changes to the BIOS items. BIOS SETUP UTILITY Main Ai Tweaker Advanced Power Boot Tools Exit Exit Options Exit & Save Changes Exit & Discard Changes Discard Changes Load Setup Defaults Exit system setup after saving the changes. F10 key can be used for this operation.
This chapter describes the contents of the support DVD that comes with the motherboard package and the software.
Chapter summary 4 4.1 Installing an operating system.................................................... 4-1 4.3 Software information.................................................................. 4-10 4.2 4.4 4.5 Support DVD information............................................................. 4-1 RAID configurations................................................................... 4-48 Creating a RAID driver disk........................................................
4.1 Installing an operating system This motherboard supports Windows® XP/ 64-bit XP/ Vista™ operating systems (OS). Always install the latest OS version and corresponding updates to maximize the features of your hardware. 4.2 • Motherboard settings and hardware options vary. Use the setup procedures presented in this chapter for reference only. Refer to your OS documentation for detailed information.
4.2.2 Drivers menu The Drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. Click to display the next page Click to return to the previous page ASUS InstAll - Installation Wizard for Anti-Virus Utility and Drivers Installs all of the drivers and anti-virus software through the Installation Wizard.
Realtek RTL8168C/RTL8111C LAN Driver Installs the Realtek® Gigabit Ethernet driver. Marvell 61xx SATA Driver Installs the Marvell® 61xx SATA driver. Marvell 64xx/63xx SAS Controller Driver Installs the Marvell® 64xx/63xx SAS controller driver. ASUS EPU-6 Engine Installs the ASUS EPU-6 Engine driver and utility. ASUS TurboV Installs ASUS TurboV, the advanced overclocking tool for extreme O.C. record. ASUS Express Gate Allows you to install or update Express Gate functions. USB 2.
4.2.3 Utilities menu The Utilities menu shows the applications and other software that the motherboard supports. Click to display the next page Click to return to the previous page ASUS InstAll - Installation Wizard for Utilities Installs all of the utilities through the Installation Wizard. ASUS Update The ASUS Update utility allows you to update the motherboard BIOS in Windows® environment. This utility requires an Internet connection either through a network or an Internet Service Provider (ISP).
ASUS AI Suite The ASUS AI Suite is an innovative application to do overclocking, fan control, power saving and quiet thermal control. Marvell RAID Utility Installs Marvell RAUD Utility. Realtek Teaming Utility Installs the Realtek® Teaming Utility. Adobe Reader 8 Installs the Adobe® Reader that allows you to open, view, and print documents in Portable Document Format (PDF). Ulead Burn.Now Installs the Ulead Burn.Now application for Audio DVD, CD and data disc creation. Microsoft DirectX 9.
4.2.4 Make disk menu The Make disk menu contains items to create the Intel ICH10R or Marvell® 61xx driver disk. Intel ICH10R 32/64 bit AHCI/RAID Driver Disk Allows you to create an ICH10R 32/64bit RAID/AHCI driver disk. Marvell 61xx 32/64bit SATA RAID Driver Allows you to create a Marvell® 61xx 32/64bit SATA RAID driver disk. Marvell 64xx/63xx SAS Controller Driver Allows you to create a Marvell® 63xx/64xx SAS controller driver disk for 32/64bit system.
4.2.5 Manual menu The Manual menu contains a list of supplementary user manuals. Click an item to open the folder of the user manual. Most user manual files are in Portable Document Format (PDF). Install the Adobe® Acrobat® Reader from the Utilities menu before opening a user manual file. 4.2.6 ASUS Contact information Click the Contact tab to display the ASUS contact information. You can also find this information on the inside front cover of this user guide.
4.2.7 Other information The icons on the top right corner of the screen give additional information on the motherboard and the contents of the support DVD. Click an icon to display the specified information. Motherboard Info Displays the general specifications of the motherboard. Browse this DVD Displays the support DVD contents in graphical format.
Technical support Form Displays the ASUS Technical Support Request Form that you have to fill out when requesting technical support. Filelist Displays the contents of the support DVD in text format.
4.3 Software information Most of the applications in the support DVD have wizards that will conveniently guide you through the installation. View the online help or readme file that came with the software application for more information. 4.3.1 ASUS MyLogo 2™ The ASUS MyLogo 2™ utility lets you customize the boot logo. The boot logo is the image that appears on screen during the Power‑On‑Self-Tests (POST).
7. When the logo images appear on the right window pane, select an image to enlarge by clicking on it. 8. Adjust the boot image to your desired size by selecting a value on the Ratio box. 9. When the screen returns to the ASUS Update utility, flash the original BIOS to load the new boot logo. 10. After flashing the BIOS, restart the computer to display the new boot logo during POST.
4.3.2 AI NET 2 The AI NET 2 features the Marvell® Virtual Cable Tester™ (VCT). VCT is a cable diagnostic utility that reports LAN cable faults and shorts using the Time Domain Reflectometry (TDR) technology. The VCT detects and reports open and shorted cables, impedance mismatches, pair swaps, pair polarity problems, and pair skew problems of up to 64 ns at one meter accuracy. The VCT feature reduces networking and support costs through a highly manageable and controlled network system.
4.3.3 ASUS PC Probe II PC Probe II is a utility that monitors the computer’s vital components, and detects and alerts you of any problem with these components. PC Probe II senses fan rotations, CPU temperature, and system voltages, among others. Because PC Probe II is software-based, you can start monitoring your computer the moment you turn it on. With this utility, you are assured that your computer is always at a healthy operating condition.
Button Function Opens the Configuration window Opens the Report window Opens the Desktop Management Interface window Opens the Peripheral Component Interconnect window Opens the Windows Management Instrumentation window Opens the hard disk drive, memory, CPU usage window Shows/Hides the Preference section Minimizes the application Closes the application Sensor alert When a system sensor detects a problem, the main window right handle turns red, as the illustrations below show.
Hardware monitor panels The hardware monitor panels display the current value of a system sensor such as fan rotation, CPU temperature, and voltages. The hardware monitor panels come in two display modes: hexagonal (large) and rectangular (small). When you check the Enable Monitoring Panel option from the Preference section, the monitor panels appear on your computer’s desktop.
Monitoring sensor alert The monitor panel turns red when a component value exceeds or is lower than the threshold value. Refer to the illustrations below. Small display Large display WMI browser Click to display the WMI (Windows Management Instrumentation) browser. This browser displays various Windows® management information. Click an item from the left panel to display on the right panel. Click the plus sign (+) before WMI Information to display the available information.
PCI browser Click to display the PCI (Peripheral Component Interconnect) browser. This browser provides information on the PCI devices installed on your system. Click the plus sign (+) before the PCI Information item to display available information. Usage The Usage browser displays real-time information on the CPU, hard disk drive space, and memory usage. Click to display the Usage browser. CPU usage The CPU tab displays realtime CPU usage in line graph representation.
Memory usage The Memory tab shows both used and available physical memory. The pie chart at the bottom of the window represents the used (blue) and the available physical memory. Configuring PC Probe II Click to view and adjust the sensor threshold values. The Config window has two tabs: Sensor/Threshold and Preference. The Sensor/ Threshold tab enables you to activate the sensors or to adjust the sensor threshold values.
4.3.4 ASUS AI Suite ASUS AI Suite allows you to launch EPU—6 Engine, AI Nap, Fan Xpert, and TurboV utilities easily. Installing AI Suite To install AI Suite on your computer: 1. 2. 3. Place the support DVD to the optical drive. The Drivers installation tab appears if your computer has an enabled Autorun feature. Click the Utilities tab, then click AI Suite. Follow the screen instructions to complete installation.
Other feature buttons Click on right corner of the main window to open the monitor window. Displays the CPU/ system temperature, CPU/memory/PCIE voltage, and CPU/ chassis fan speed Displays the FSB/CPU frequency Click on right corner of the expanded window to switch the temperature from degrees Centigrade to degrees Fahrenheit.
4.3.5 ASUS AI Nap This feature allows you to minimize the power consumption of your computer whenever you are away. Enable this feature for minimum power consumption and a more quiet system operation. After installing AI Suite from the bundled support DVD, you can launch the utility by double-clicking the AI Suite icon on the Windows OS taskbar and click the AI Nap button on the AI Suite main window. Click Yes on the confirmation screen.
4.3.6 ASUS Fan Xpert Asus Fan Xpert intelligently allows you to adjust both the CPU and chassis fan speeds according to different ambient temperatures caused by different climate conditions in different geographic regions and your PC’s system loading. The built-in variety of useful profiles offer flexible controls of fan speed to achieve a quiet and cool environment. Install AI Suite from the bundled support DVD.
Fan profile modes • Disable: Select this mode to disable the Fan Xpert function. • Silent: This mode minimizes fan speed for quiet fan operation. • • • • • Standard: This mode makes the fan adjust speed in moderate pattern. Turbo: This mode boosts the fan to achieve maximal fan speed for the best cooling effect. Intelligent: This mode automatically adjusts the CPU fan speed with the ambient temperature.
4.3.7 ASUS EPU–6 Engine ASUS EPU–6 Engine is an energy-efficient tool that satisfies different computing needs. This utility provides four modes that you can select to enhance system performance or save power. Selecting Auto mode will have the system shift modes automatically according to current system status. You can also customize each mode by configuring settings like CPU frequency, vCore Voltage, and Fan Control. Installing 6 Engine To install 6 Engine on your computer: 1. 2. 3.
6 Engine main menu Displays CPU Power and Total CPU Energy Saving Displays the following message if no VGA power saving engine is detected. Lights up when power saving engine is activated Displays the amount of CO2 reduced *Shifts between the display of Total and Current CO2 reduced Displays current mode Auto Mode Turbo Mode Runs calibration High Performance Mode Medium Power Saving Mode Max.
Advanced settings menu Click Setting ( ) from the 6 Engine main menu to display configuration options in each mode. Some options in certain modes are dimmed, meaning that they are not available. Click to select a mode Move the slider to adjust Click the arrow to see more options Restore default settings Click to apply settings Click to abort settings Configuration options in Advanced settings menu The following lists the configuration options and their definitions in Advanced settings menu.
• • Fan Control: Adjusts fan speeds to reduce noise and save system power. • • Quiet: Lowers CPU fan speed and shuts off two chassis fans. Slow: Lowers CPU fan and two chassis fan speeds. AI Nap Idle Time: Enters AI Nap mode after a certain time during system idle process. Refer to the following table for the configuration options in each mode.
4.3.8 ASUS TurboV ASUS TurboV allows you to overclock the CPU frequency, CPU voltage, QPI/ Memory controller voltage, and DRAM voltage in WIndows® environment and takes effect in real-time without exiting and rebooting the OS. Refer to the CPU documentation before adjusting CPU voltage settings. Setting a high voltage may damage the CPU permanently, and setting a low voltage may make the system unstable.
Advanced settings menu Click More Setting from the TurboV main screen to display detailed configuration options for CPU/chip voltage, DRAM Reference voltage, and CPU ratio. Advance Mode Advanced CPU and DRAM voltage settings CPU Ratio Mode Adjusts CPU core ratio Displays CPU frequency • Only Intel® Core™ i7 Extreme Edition processors support the CPU Ratio function. • Set the CPU Ratio Setting BIOS item to [Auto] before using the CPU Ratio function in TurboV. See page 3-26 for details.
4.3.9 SoundMAX® High Definition Audio utility The ADI AD2000B High Definition Audio CODEC provides 8-channel audio capability through the SoundMAX® audio utility with AudioESP™ software to deliver the ultimate audio experience on your PC. The software implements high quality audio synthesis/rendering, 3D sound positioning, and advanced voice-input technologies.
Setup The Setup tab allows you to adjust multi-speaker settings. Click speaker to test individual speaker volume Drag slider to adjust individual speaker volume Click to swap center/subwoofer output in 5.1 / 7.1 Surround mode Click to test the volume of all individual speakers Click to choose a multi-speaker configuration Listening Experience The Listening Experience tab allows you to enable or disable the Sonic Focus sound effects and adjust further sound settings.
Recording Experience The Recording Experience tab allows you to calibrate microphone settings for high quality recording effects. Choose a desired enhancement Click to start microphone calibration Click to boost microphone volume Advanced The Advanced tab allows you to configure detailed utility settings.
B. SoundMAX audio utility for Windows XP™ Audio Setup Wizard By clicking the icon from the SoundMAX® control panel, you can easily configure your audio settings. Simply follow the succeeding screen instructions and begin enjoying High Definition Audio. ASUS P6T6 WS Revolution Jack configuration This screen helps you configure your computer’s audio ports, depending on the audio devices you have installed.
Adjust speaker volume This screen helps you adjust speaker volume. Click the Test button to hear the changes you have made. Adjust microphone volume This screen helps you adjust microphone volume. You will be asked to read pre-written text to allow the AudioWizard to adjust the volume as you speak. Audio preferences Click the icon to go to the Preferences page. This page allows you to change various audio settings.
4.3.10 ASUS Express Gate ASUS Express Gate is an instant-on environment that gives you quick access to the Internet. Within a few seconds of powering on your computer, you will be at the Express Gate menu where you can start the web browser, Skype, or other Express Gate softwares. Installing ASUS Express Gate • ASUS Express Gate supports installation on SATA HDDs in IDE mode only. • ASUS Express Gate supports HDDs or ODDs connected to motherboard chipset-controlled onboard SATA ports only.
5. 6. Select the target disk volume for you to install Express Gate. If you have multiple volumes and OS installed in your hard drive, it is recommended to install Express Gate in Volume C. Click Next to continue. Follow the screen instructions to complete installation. The First Screen Express Gate’s first screen appears within a few seconds after you power on the computer. From here, you can immediately start the web browser or Skype. You can also choose to continue booting normally (e.g.
Once inside the Express Gate environment, click on the icons on the LaunchBar, by default at bottom of the screen, to launch or switch between softwares. You can re-arrange, re-size and move windows. Bring a window to the foreground by clicking within it or by clicking on its corresponding software icon. Re-size a window by dragging any of its four corners. Move a window by dragging its title bar. Besides using the LaunchBar, you can also switch between softwares by pressing + on the keyboard.
Using the Configuration Panel Use the configuration panel to change various Express Gate settings. Click on an icon to open a particular configuration tool. The following tools are available: • Date and Time: set current date and time as well as time zone. • Language and Keyboard: choose your language and keyboard preferences. • • • • Input Language: choose your preferred input language and method. LaunchBar Settings: customize your LaunchBar (where it docks, whether it auto-hides, etc.
Using the LaunchBar The LaunchBar has several system icons that show you various system statuses and let you configure individual Express Gate settings. The LaunchBar can be configured to auto-hide, if you want more screen space for the softwares. It can also be configured to dock on any of the four sides of the screen. Starts the Web Browser for quick access to the World Wide Web. Accesses the Online Games feature of Express Gate. Starts the Photo Manager album / organizer tool.
Click to show the “ASUS Utility” panel. Click to show “About Express Gate ”. Click to open Express Gate Help. Click to bring up power options window to boot to OS, restart or power down. This window is also shown when you press Ctrl-Alt-Del on the keyboard. Power off Enter OS Restart Check to save user profile Cancel and return to Express Gate How Do I Get on to the Internet If Internet doesn’t seem to be working in the Express Gate environment, check the following: 1. Open the Configuration Panel.
3. • • • • Make the proper network configurations. Each network interface is enabled immediately when you check the box next to it. If you use a network cable connected to a home router (which is then connected to your DSL/cable modem), enable every LAN port(s). Express Gate will automatically use whichever port is connected. • The number of the LAN ports may differ from motherboards. • If you plug the network cable into a different port while Express Gate is running (e.g.
Using the Online Games Express Gate SSD introduces a Splashtop Gaming portal site, which provides many interesting games in different categories. The game titles are updated from time to time. Enjoying these great games is just as easy as it gets! You have to enable the network connection to run the Online Games feature.
Configuring Express Gate in BIOS Setup Enter BIOS setup by pressing key after powering on or by clicking on the BIOS setup icon on Express Gate’s first screen. Express Gate configuration options are under the Tools menu. See page 3-41 for details. BIOS SETUP UTILITY Main Ai Tweaker Advanced Power Boot Tools Exit ASUS EZ Flash 2 Express Gate Enter OS Timer Reset User Data [Enabled] [10 Seconds] [No] Press ENTER to run the utility to select and update BIOS.
4.3.11 Realtek Teaming Utility This motherboard features two Realtek® 8111C PCIe Gigabit LAN controllers and supports Teaming function, which allows two single connections to be grouped as one single connection, providing benefits such as bandwidth increase, load balancing, and fault tolerance. The speed of transmission is subject to the actual network environment or status even with Teaming enabled. To install Realtek Teaming Utility 1. 2. Place the support DVD to the optical drive.
To remove a teaming set in Windows® XP 1. 2. Launch the Realtek Teaming Utility. Select the teaming set that you want to remove in the left column, select the virtual adapter in the right column, and then click Remove. Configuring Realtek Teaming Utility in Windows® Vista To create a teaming set in Windows® Vista 1. 2. Launch the Realtek VLAN & Teaming Utility by clicking Start > All Programs > Realtek Teaming and VLAN Utility > Realtek Teaming and VLAN Utility.
To create a virtual LAN adapter in Windows® Vista 1. 2. 3. Launch the Realtek VLAN & Teaming Utility. Choose one adapter to create the virtual LAN adapter, and then click VLAN. Click OK to close the message window and finish creating the virtual LAN adapter. Click Start > Control Panel > Network and Sharing Center, and then click Manage network connections from the left Tasks list. Right-click the virtual LAN adapter icon and select Properties. 4.
5. Click the Advanced tab in the Realtek Virtual Miniport Driver for VLAN (NDIS 6.0) Properties window and conduct necessary VLAN settings. Close all windows when finished. To remove a virtual LAN adapter in Windows® Vista 1. 2. Launch the Realtek VLAN & Teaming Utility. Click Remove to remove the existing virtual LAN adapter.
4.4 RAID configurations The motherboard comes with the Intel® ICH10R Southbridge controller that supports RAID 0, RAID 1, RAID 10, and RAID 5 for six independent Serial ATA channels. 4.4.1 RAID definitions RAID 0 (Data striping) optimizes two identical hard disk drives to read and write data in parallel, interleaved stacks. Two hard disks perform the same work as a single drive but at a sustained data transfer rate, double that of a single disk alone, thus improving data access and storage.
4.4.2 Installing Serial ATA hard disks The motherboard supports Serial ATA hard disk drives. For optimal performance, install identical drives of the same model and capacity when creating a disk array. To install the SATA hard disks for a RAID configuration: 1. Install the SATA hard disks into the drive bays. 3. Connect a SATA power cable to the power connector on each drive. 2. Connect the SATA signal cables. 4.4.
Intel® Matrix Storage Manager option ROM utility The Intel® Matrix Storage Manager Option ROM utility allows you to create RAID 0, RAID 1, RAID 10 (RAID 0+1), and RAID 5 set(s) from Serial ATA hard disk drives that are connected to the Serial ATA connectors supported by the Southbridge. To enter the Intel® Matrix Storage Manager option ROM utility: 1. Install all the Serial ATA hard disk drives. 3. During POST, press to display the utility main menu. 2. Turn on the system.
Creating a RAID 0 set (striped) To create a RAID 0 set: 1. From the utility main menu, select 1. Create RAID Volume and press . The following screen appears. Intel(R) Matrix Storage Manager option ROM v8.0.0.1027 ICH10R wRAID5 Copyright(C) 2003-08 Intel Corporation. All Rights Reserved.
6. Use the up/down arrow key to select the stripe size for the RAID 0 array, and then press . The available stripe size values range from 4 KB to 128 KB. The default stripe size is 128 KB. We recommend a lower stripe size for server systems, and a higher stripe size for multimedia computer systems used mainly for audio and video editing. 7. 8. Enter the RAID volume capacity that you want and press . The default value indicates the maximum capacity allowed.
Creating a RAID 1 set (mirrored) To create a RAID 1 set: 1. From the utility main menu, select 1. Create RAID Volume and press . The following screen appears. Intel(R) Matrix Storage Manager option ROM v8.0.0.1027 ICH10R wRAID5 Copyright(C) 2003-08 Intel Corporation. All Rights Reserved.
Creating a RAID 10 set (RAID 0+1) To create a RAID 10 set: 1. From the utility main menu, select 1. Create RAID Volume and press . The following screen appears. Intel(R) Matrix Storage Manager option ROM v8.0.0.1027 ICH10R wRAID5 Copyright(C) 2003-08 Intel Corporation. All Rights Reserved.
6. Press when the Create Volume item is highlighted. The following warning message appears. WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST. Are you sure you want to create this volume? (Y/N): 7. Press to create the RAID volume and return to the main menu or to go back to the Create Volume menu. Creating a RAID 5 set (parity) To create a RAID 5 set: 1. From the utility main menu, select 1. Create RAID Volume and press . The following screen appears.
4. The Disks item is highlighted, press to select the hard disk drives to configure as RAID. The following screen appears. [ SELECT DISKS ] Port Drive Model Serial # Size Status 0 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID 1 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID 2 XXXXXXXXXXXX XXXXXXXX XX.XGB Non-RAID 3 XXXXXXXXXXXX XXXXXXXX XX.
4.4.4 Marvell® SAS RAID configurations The Marvell® 88SE6320 SAS controller allows you to configure RAID 0 and 1 set on the SAS hard disk drives. Setting the RAID item in BIOS You must set the RAID item in the BIOS Setup before you can create a RAID set. To do this: 1. 2. 3. 4. Install two internal SAS hard disk drives to the SAS connectors labeled SAS1/2. Boot up your computer, and press during POST to enter the BIOS setup.
Marvell® RAID BIOS Configuration utility To enter the Marvell® RAID BIOS setup utility 1. 2. Boot up your computer. During POST, press + to enter the utility main menu. Marvell BIOS Setup (c) 2007 Marvell Technology Group Ltd. [Selection] [Controller] [ Devices ] [ RAID ] Adapter 1 VendorID:DeviceID: BIOS Version: PCI Slot: Adapter Serial Number: IRQ Number: Port 0 SAS Address: Port 1 SAS Address: Port 2 SAS Address: Port 3 SAS Address: 11AB:6320 2.1.0.
Creating a RAID 0 or RAID 1 set To create a RAID set: 1. From the utility menu bar, select RAID > Create array. Marvell BIOS Setup (c) 2007 Marvell Technology Group Ltd. [Selection] [Controller] [ Devices ] [ RAID ] RAID Config Create array Delete array Spare Management ENTER/SPACE:Select, ESC:Back/Exit 2. Press . The screen shows the disks you can add to make up the RAID set. Use the arrow key to select a disk and press or to include this disk in the array.
4. The Create Array screen appears. Marvell BIOS Setup (c) 2007 Marvell Technology Group Ltd. [Selection] [Controller] [ Devices ] [ RAID ] RAID Config Select free disks to create Create Array Name Size Max Speed Status ID Port Disk Raid Level : RAID0 *0 0 SAS : ST336754SS 36.6GB SAS 3.0 FREE Max Size(MB): :ST336754SS 36.6GB SAS 73240 *1 1 SAS 3.
6. A confirmation screen appears. Press to confirm the array creation. Marvell BIOS Setup (c) 2007 Marvell Technology Group Ltd. [Selection] [Controller] [ Devices ] [ RAID ] RAID Config Select free disks to create Create Array Name Size Max Speed Status ID Port Disk Raid Level : RAID0 *0 0 SAS : ST336754SS 36.6GB SAS 3.0 FREE Max Size(MB): :ST336754SS 36.6GB SAS 73240 *1 1 SAS 3.
Deleting an array To delete a RAID set 1. From the utility menu bar, select RAID > Delete array, and then press . The Delete array screen appears. Marvell BIOS Setup (c) 2007 Marvell Technology Group Ltd. [Selection] [Controller] [ Devices ] [ RAID ] RAID Config Delete array ID Name Size Level Status Stripe CacheMode Members 0 73.2GB RAID0 ONLINE 64KB WriteBack 0,1 NEXT ENTER/SPACE:Select, ESC:Back/Exit 2. Select a desired array to delete and select NEXT.
Advanced Operation From the utility menu bar, select Devices, and then press . The Advanced Operation screen appears. You can run Disk Verify and Low Level Format in the Advanced Operation screen. Marvell BIOS Setup (c) 2007 Marvell Technology Group Ltd. [Selection] [Controller] [ Devices ] [ RAID ] Select Device For Advanced Operation [Physical Disks] ID Port Disk Name Size Max Speed 0 0 SAS : ST336754SS 36.7GB SAS 3.
To run Low Level Format 1. In the Advanced Operation screen, use the arrow key to select a disk and press or . The Advanced Menu appears. Select Low Level Format and press . Marvell BIOS Setup (c) 2007 Marvell Technology Group Ltd. [ Devices ] [Selection] [Controller] [ RAID ] Select Device For Advanced Operation [Physical Disks] Menu ID Port Disk Name Size Max Advanced Speed 0 0 SAS : ST336754SS 36.7GB SAS 3.
Controller Configuration From the utility menu bar, select Controller, and then press . The Controller Config screen appears and allows you to change controller settings. Marvell BIOS Setup (c) 2007 Marvell Technology Group Ltd. [Selection] [Controller] [ Devices ] [ RAID ] [Controller Config] INT 13h [Enable] Silent Mode [Disable] Halt On Error [Disable] ENTER/SPACE:Select, ESC:Back/Exit INT 13h [Enable] Allows you to enable or disable the Interrupt 13h support.
4.5 Creating a RAID driver disk A floppy disk with the RAID driver is required when installing Windows® XP/Vista and later operating system on a hard disk drive that is included in a RAID set. For Windows Vista user, you can create a RAID driver disk with a floppy disk drive or a USB flash disk drive. 4.5.1 Creating a RAID driver disk without entering the OS To create a RAID driver disk without entering the OS: 1. Boot your computer. 3. Set the optical drive as the primary boot device. 2. 4. 5. 6.
To install the RAID driver in Windows XP: 1. 2. 3. 4. During the OS installation, the system prompts you to press the key to install third-party SCSI or RAID driver. Press then insert the floppy disk with RAID driver into the floppy disk drive. When prompted to select the SCSI adapter to install, make sure you select Intel(R) SATA RAID Controller (Desktop ICH10R). Follow the succeeding screen instructions to complete the installation. To install the RAID driver in Windows® Vista: 1. 2. 3.
4-68 Chapter 4: Software support
This chapter describes how to install and configure multiple ATI® CrossFireX™ and NVIDIA® SLI™ graphics cards.
Chapter summary 5.1 5.2 5 ATI® CrossFireX™ technology..................................................... 5-1 NVIDIA® SLI™ technology............................................................
5.1 ATI® CrossFireX™ technology The motherboard supports the ATI® CrossFireX™ technology that allows you to install multi-graphics processing units (GPU) graphics cards. Follow the installation procedures in this section. 5.1.1 • • • Requirements In CrossFireX mode, you should have two identical CrossFireX-ready graphics cards or one CrossFireX-ready dual-GPU graphics card that are ATI® certified. Ensure that your graphics card driver supports the ATI CrossFireX technology.
5.1.3 Installing CrossFireX graphics cards The following pictures are for reference only. The graphics cards and the motherboard layout may vary with models, but the installation steps remain the same. 1. 2. 3. 4. Prepare two CrossFireX-ready graphics cards. Insert the two graphics card into the PCIEX16 slots. If your motherboard has more than two PCIEX16 slots, refer to Chapter 2 in this user manual for the locations of the PCIEX16 slots recommended for multi-graphics card installation.
5.1.4 Installing the device drivers Refer to the documentation that came with your graphics card package to install the device drivers. Ensure that your PCI Express graphics card driver supports the ATI® CrossFireX™ technology. Download the latest driver from the AMD website (www.amd.com). 5.1.5 Enabling the ATI® CrossFireX™ technology After installing your graphics cards and the device drivers, enable the CrossFireX™ feature through the ATI Catalyst™ Control Center in Windows environment.
Enabling Dual CrossFireX settings 1. 2. 3. 4. In the Catalyst Control Center window, click Graphics Settings > CrossFireX > Configure. From the Graphics Adapter list, select the graphics card to act as the display GPU. Select Enable CrossFireX. Click Apply, and then click OK to exit the window.
5.2 NVIDIA® SLI™ technology The motherboard supports the NVIDIA® SLI™ (Scalable Link Interface) technology that allows you to install multi-graphics processing units (GPU) graphics cards. Follow the installation procedures in this section. 5.2.1 • • • • Requirements In Dual SLI mode, you should have two identical SLI-ready graphics cards that are NVIDIA® certified. In Triple SLI mode, you should have three identical SLI-ready graphics cards that are NVIDIA® certified.
5.2.2 Installing two SLI-ready graphics cards The following pictures are for reference only. The graphics cards and the motherboard layout may vary with models, but the installation steps remain the same. 1. 2. 3. 4. 5. 6. Prepare two SLI-ready graphics cards. Insert the two graphics card into the PCIEX16 slots. If your motherboard has more than two PCIEX16 slots, refer to Chapter 2 in this user manual for the locations of the PCIEX16 slots recommended for multi-graphics card installation.
5.2.3 1. 2. 3. 4. 5. 6. Installing three SLI-ready graphics cards Prepare three SLI-ready graphics cards. Insert the three graphics card into the PCIEX16 slots. If your motherboard has more than two PCIEX16 slots, refer to Chapter 2 in this user manual for the locations of the PCIEX16 slots recommended for multi-graphics card installation. Ensure that the cards are properly seated on the slots. Align and firmly insert the 3-Way SLI bridge connector to the goldfingers on each graphics card.
5.2.4 Installing the device drivers Refer to the documentation that came with your graphics card package to install the device drivers. 5.2.5 • Ensure that your PCI Express graphics card driver supports the NVIDIA® SLI™ technology. Download the latest driver from the NVIDIA website (www.nvidia.com). • If you are using a Triple SLI system, ensure to install the NVIDIA® 3-way SLI driver under Windows® Vista™. The NVIDIA 3-way SLI technology is supported by Windows® Vista™ only.
B2. From the Personalization window, select Display Settings. B3. From the Display Settings dialog box, click Advanced Settings. B4. Select the NVIDIA GeForce tab, and then click Start the NVIDIA Control Panel.
B5. The NVIDIA Control Panel window appears. Enabling Dual SLI settings From the NVIDIA Control Panel window, select Set SLI Configuration. Click Enable SLI and set the display for viewing SLI rendered content. When done, click Apply. Enabling Triple SLI settings 1. From the NVIDIA Control Panel window, select Set SLI Configuration, and then click Enable 3-way NVIDIA SLI. When done, click Apply. 2. Select the 3D Settings tab and enable the Show SLI Visual Indicators item.
