Manual
4-44 Chapter 4: Software support
4.3.11 Realtek Teaming Utility
This motherboard features two Realtek
®
8111C PCIe Gigabit LAN controllers and
supports Teaming function, which allows two single connections to be grouped
as one single connection, providing benets such as bandwidth increase, load
balancing, and fault tolerance.
The speed of transmission is subject to the actual network environment or
status even with Teaming enabled.
To install Realtek Teaming Utility
1. Place the support DVD to the optical drive. Click
Realtek Teaming Utility
from the Drivers tab.
2. Follow the screen instructions to complete installation.
Conguring Realtek Teaming Utility in Windows
®
XP
To create a teaming set in Windows
®
XP
1. Launch the Realtek Teaming Utility by clicking
Start > All Programs >
Realtek > Teaming Utility > Teaming Utility.
2. Select a LAN adapter from the
left column, select Teaming in
the middle column, and then click
Create Team.
3. Enter a name for the teaming in the
Team Name box. Select a teaming
mode that best suits your network
environment, and then choose
the adapters to join the teaming
set. Click OK to nish the teaming
setting.