Manual

4-60 Chapter 4: Software support
4. The
Create Array
screen appears.
Marvell BIOS Setup (c) 2007 Marvell Technology Group Ltd.
ENTER/SPACE:Select, ESC:Back/Exit
[Selection] [Controller] [ Devices ] [ RAID ]
RAID Cong
Select free disks to create
ID Port Disk Name Size Max Speed Status
*0 0 SAS : ST336754SS 36.6GB SAS 3.0 FREE
*1 1 SAS : ST336754SS 36.6GB SAS 3.0 FREE
NEXT
Create Array
Raid Level : RAID0
Max Size(MB) : 73240
Capacity(MB) : 73240
Stripe Size : 64KB
Quick Init : No
Cache Mode : WriteBack
Array Name :
Disks ID : 0 1
NEXT
5. Use the arrow key to select the RAID Level item and press <Enter> to display
the available RAID set. Select a RAID set and press <Enter>. After you have
selected the desired RAID set, select Next to create array.
• The available RAID sets vary with the number of disks you select. The RAID
sets that you are not allowed to create are grayed out.
• Except for the
RAID Level item, we recommend you keep the default values
for the other items in Create Array screen.
Marvell BIOS Setup (c) 2007 Marvell Technology Group Ltd.
ENTER/SPACE:Select, ESC:Back/Exit
[Selection] [Controller] [ Devices ] [ RAID ]
RAID Cong
Select free disks to create
ID Port Disk Name Size Max Speed Status
*0 0 SAS : ST336754SS 36.6GB SAS 3.0 FREE
*1 1 SAS : ST336754SS 36.6GB SAS 3.0 FREE
NEXT
Create Array
Raid Level : RAID0
Max Size(MB) : 146480
Capacity(MB) : 146480
Stripe Size : 64KB
Quick Init : No
Cache Mode : WriteBack
Array Name :
Disks ID :
0 1
NEXT
*RAID0
RAID1
RAID10