Manual

4-20 Chapter 4: Software support

Chapter 4

To install the RAID driver in Windows

Vista

1. Insert the oppy disk with RAID driver into the oppy disk drive.

2. During the OS installation, select Intel(R) SATA RAID Controller (Desktop ICH10R).

3. Follow the succeeding screen instructions to complete the installation.

4.5.4 Using a USB oppy disk drive

Due to OS limitation, Windows

XP may not recognize the USB oppy disk drive when you

install the RAID driver from a oppy disk during the OS installation.

To solve this issue, add the USB oppy disk drive’s Vendor ID (VID) and Product ID (PID) to

the oppy disk containing the RAID driver. Refer to the steps below:

1. Using another computer, plug the USB oppy disk drive, and insert the oppy disk

containing the RAID driver.

2. Right-click My Computer on the

Windows

desktop or start menu,

and then select Manage from the

pop-up window.

3. Select Device Manager. From the

Universal Serial Bus controllers,

right-click xxxxxx USB Floppy, and

then select Properties from the pop-up

window.

The name of the USB oppy disk

drive varies with different vendors.

4. Click Details tab. The Vendor ID (VID)

and Product ID (PID) are displayed.