Owner's manual
2-12 ASUS P7H55-M
DRAM O.C. Profile [DDR3-1600MHz]
This item appears only when you set the Ai Overclock Tuner item to [D.O.C.P.] and
allows you to select a DRAM O.C. prole, which applies different settings to DRAM
frequency, DRAM timing and DRAM voltage.
Conguration options: [DDR3-1600MHz] [DDR3-1800MHz] [DDR3-1866MHz] [DDR3-
2000MHz] [DDR3-2133MHz] [DDR3-2200MHz]
The conguration options for the following sub-item vary depending on the DIMMs you
install on the motherboard.
To obtain the best performance of the X.M.P. DIMM or 1600MHz DIMM, install only one
DIMM on each memory channel.
2.4.2 CPU Ratio Setting [Auto]
Allows you to adjust the ratio between CPU Core Clock and BCLK Frequency. Use the <+>
and <-> keys to adjust the value. The valid value ranges differently according to your CPU
model.
2.4.3 Intel(R) SpeedStep(TM) Tech [Disabled]
When set to [Disabled], the CPU runs at its default speed. When set to [Enabled], the CPU
speed is controlled by the operating system. Conguration options: [Disabled] [Enabled]
2.4.4 Xtreme Phase Full Power Mode [Auto]
[Auto] Automatic conguration.
[Enabled] Enables Full Power Mode to ensure the best CPU overclocking
performance.
eXtreme Memory Profile [Disabled]
This item appears only when you set the Ai Overclock Tuner item to [X.M.P.]
DRAM Frequency
(MHz)
CPU Frequency (GHz)
2.66 2.8 2.93
1333 Auto Auto Auto
1600 D.O.C.P. Auto Auto
Above 1600 D.O.C.P. D.O.C.P. D.O.C.P.
• When using DIMMs with afrequency higher than the Intel
®
CPU spec, use this ASUS
exclusive DRAM O.C. Prole function to overclock the DRAM.
• Adjust BCLK frequency to obtain a better performance after applying the D.O.C.P.
function.