User guide
2-34 Chapter 2: Hardware information
Chapter 2
4. JMicron
®
JMB363 Serial ATA connector (7-pin SATA_E3 [black])
This connector is for the Serial ATA signal cables for Serial ATA hard disk drives and
optical disc drives.
5. TurboV Remote connector (5-pin TURBO_CON)
This connector is for the bundled TurboV Remote. TurboV Remote allows you to turn
on/off the computer, adjust EPU modes and system bus speed, and launch Turbo Key
proles for system overclocking without interrupting on-going work or games. You can
also clear BIOS setup information by pressing the Clear CMOS key on the back of the
TurboV Remote.
• Firmly hold the connector to remove TurboV Remote. DO NOT force or the cable will
be broken.
• Ensure to install the TurboV Remote driver from the motherboard support DVD. Refer
to section
4.2 Support DVD information
for details.
• Refer to section
4.3.4 ASUS EPU-6 Engine
and
4.4 ASUS Unique Overclocking
Utlity—TurboV EVO
for related software details.