User guide

3-34 Chapter 3: BIOS setup
Chapter 3
Current CMOS
Restore CMOS
A:
Note
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [Esc] Exit
PATH: A:\
BOARD: P7P55D Deluxe
VER: 0166
DATE: 07/08/2009
BOARD: Unknown
VER: Unknown
DATE: Unknown
ASUSTek O.C. Prole Utility V2.00b
• This function can support devices such as a USB ash disk with FAT 32/16 format and
single partition only.
• DO NOT shut down or reset the system while updating the BIOS to prevent the
system boot failure!
• We recommend that you update the BIOS le only coming from the same memory/CPU
conguration and BIOS version.
• Only the CMO le can be loaded.
Drive Xpert conguration
Drive Xpert Group :
Current Mode :Normal Mode
Driver Xpert Mode Update:
Update To Super Speed [Press Enter]
Update To EZ Backup [Press Enter]
Update To Normal Mode [Press Enter]
Drive Xpert Device(s) List :
SATA_E1 (Gray) : [ST380817AS]
SATA_E2 (Dark Blue) : [ST380817AS]
BIOS SETUP UTILITY
Tools
Update Drive Xpert
Mode changes after
saving changes and
exiting BIOS setup.
Discard Drive Xpert
Mode changes after
exiting BIOS setup
without saving any
changes.
3.9.2 Drive Xpert Conguration
• Before using the Drive Xpert function, ensure that you have connected the SATA
signal cables and installed SATA hard disk drives to the SATA_E1 (gray) and SATA_E2
(dark blue) connectors.
• You can only make one Drive Xpert change a time before you save BIOS settings and
restart the computer.
Drive Xpert Group:
Current Mode
Displays the current Drive Xpert mode.