User's Manual

華碩 P8B-C 系列主板用戶手冊
5-37
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item -/+/Enter = Change Item
LSI Corp Cong Utility v7.07.00.00 (2010.04.30)
Adapter Properties -- SAS2008
Adapter SAS 2008
PCI Slot 00
PCI Address(Bus/Dev) 01:00
MPT Firmware Revision 8.00.00.00-IR
SAS Address 500E0180:00010424
NVDATA Version 07.01
Status Enabled
Boot Order 0
Boot Support [Enabled BIOS & OS]
RAID Properties
SAS Topology
Advanced Adapter Properties
Esc = Exit Menu F1/Shift+1 = Help
Enter = Choose volume type to create
L S I C o r p C o n f i g U t i l i t y v 7 . 0 7 . 0 0 . 0 0 ( 2 0 1 0 . 0 4 . 3 0 )
Select New Volume Type -- SAS2008
Create RAID 1 Volume Create a RAID 1 volume
consisting of 2 disks plus up to 2
optional hot spares. ALL DATA on
volume disks will be DELETED!
Create RAID 1E/10 Volume Create a RAID 1E or RAID 10 volume
consisting of 3 to 10 disks
including up to 2 optional hot
spares. ALL DATA on
volume disks will be DELETED!
Create RAID 0 Volume Create a RAID 0 volume consisting
of 2 to 10 disks. ALL DATA on
volume disks will be DELETED!
4. Adapter Properties 畫面出現。
使用方向鍵選擇 RAID Properties，然後按下 <Enter>。
5. Select New Volume Type 畫面出現。
使用方向鍵選擇 Create RAID 1 Volume，然後按下 <Enter>。