User's Manual

5-50
第五章：RAID 磁盤陣列設置
Esc = Exit F1/Shift+1 = Help
Alt+D = Device Properties Alt+M = More Keys
LSI Corp Cong Utility v7.07.00.00 (2010.04.30)
SAS Topology -- SAS2008
Device Identier Device
SAS 2008(01:00) Info
﹂ Controller Direct Attach Devices Controller
﹂ RAID1 VOL LSI Logical Volume 3000
LSI Corp Cong Utility v7.07.00.00 (2010.04.30)
SAS Topology -- SAS2008
More keys for the SAS Topology display:
Alt+B = Select or deselect a device as the preferred boot device
Alt+A = Select or deselect a device as the alternate boot device
Enter = On a SAS Enclosure or Expander - Expand or Collapse Item
Enter = On a Disk Drive - Turn on the Locate LED (next key press turns off)
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item -/+/Enter = Change Item
LSI Corp Cong Utility v7.07.00.00 (2010.04.30)
Adapter Properties -- SAS2008
Adapter SAS 2008
PCI Slot 00
PCI Address(Bus/Dev) 01:00
MPT Firmware Revision 8.00.00.00-IR
SAS Address 500E0180:00010424
NVDATA Version 07.01
Status Enabled
Boot Order 0
Boot Support
[Enabled BIOS & OS]
RAID Properties
SAS Topology
Advanced Adapter Properties
5.4.5 查看 SAS 拓樸
1. 在 Adapter Properties 畫面，選擇 SAS Topology，按下 ＜Enter＞。
按下 <Alt+D> 顯示設備屬性，或按下 <Alt+M> 顯示更多按鍵信息。
2. 接著將顯示有關磁盤陣列及其組成硬盤的信息。