User's Manual

vii
目 錄 內 容
2.5.5 USB 設備設置（USB Configuration） ............................................2-20
2.5.6
內置設備設置（Onboard Devices Configuration） ....................2-20
2.5.7
高級電源管理設置（APM） ................................................................2-21
2.5.8
網絡堆棧（Network Stack） ..............................................................2-22
2.6 監控菜單（Monitor） .............................................................................................
2-23
2.6.1 CPU Temperature / MB Temperature
[xxxºC/xxxºF] .............2-23
2.6.2 CPU / Chassis Fan Speed [xxxx RPM] 或 [Ignore] / [N/A]
2-23
2.6.3 CPU Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage ..........
2-24
2.6.4 CPU Q-Fan Control [Enabled] ............................................................
2-24
2.6.5 Chassis Q-Fan Control [Enabled] ......................................................
2-24
2.6.6 Anti Surge Support [Enabled] .............................................................
2-25
2.7
啟動菜單（Boot） ...................................................................................................2-26
2.7.1 Bootup NumLock State [On] ..............................................................
2-26
2.7.2 Full Screen Logo [Enabled] ..................................................................
2-26
2.7.3 Wait For‘F1’If Error [Enabled] .....................................................
2-26
2.7.4 Option ROM Messages [Force BIOS] .............................................
2-27
2.7.5 Setup Mode [EZ Mode] ........................................................................
2-27
2.7.6 UEFI/Legacy Boot [Enabled both UEFI and Legacy] ..............
2-27
2.7.7 PCI ROM Priority [Legacy ROM] ......................................................
2-27
2.7.8 啟動項目順序（Boot Option Priorities） .......................................
2-27
2.7.9 Boot Override ............................................................................................
2-27
2.8
工具菜單（Tool） ....................................................................................................2-28
2.8.1 ASUS EZ Flash 2 .....................................................................................
2-28
2.8.2 ASUS SPD Information .........................................................................
2-28
2.8.3 ASUS O.C. Profile ....................................................................................
2-28
2.9
退出 BIOS 程序（Exit） ........................................................................................2-29