User Manual

2-30
Chapter 2: Hardware information
2.8 Connectors
2.8.1 Rear panel connectors
1. PS/2 keyboard/mouse port (purple/green).
This port is for a PS/2 keyboard
or mouse.
2. RJ-45 port for iKVM.
This RJ-45 port functions only when you install an
ASMB7 management card.
P9D-M and P9D-MV models only.
3. Serial port.
This port connects a modem, or other devices that conform with
serial specication.
4.
Video Graphics Adapter port.
This port is for a VGA monitor or other VGA-
compatible devices.
5. RJ-45 ports for LAN.
These ports allows Gigabit connection to a Local Area
Network (LAN) through a network hub. Refer to the table below for the LAN
port LED indications.
6.
+5V_LED.
This LED lights up when the Power-on button is pressed and the
system is on.
7.
LOCLED1.
The Locate LED is a user-activated LED on the front of the server
module that can be remotely turned on or off. It is used to nd a specic
server module within a chassis.
8.
Power-on Button.
Press this button to turn on the system.
9. USB 2.0 ports 1 and 2.
These two 4-pin Universal Serial Bus (USB) ports
are available for connecting USB 2.0 devices.
10
.
USB 3.0 ports 1 and 2.
These two 4-pin USB ports are available for
connecting USB 3.0 devices.