User Guide

2-3ASUSPA248SeriesLCDMonitor
2.3 Connecting the cables
1. Connectthecablesasthefollowinginstructions:
To connect the power cord• :connectoneendofthepowercordsecurelyto
themonitor’sACinputport,theotherendtoapoweroutlet.
To connect the VGA/HDMI/DVI/DisplayPort cable• :
PlugoneendoftheVGA/HDMI/DVI/DisplayPortcabletothemonitor’sa.
VGA/HDMI/DVI/DisplayPortjack.
ConnecttheotherendoftheVGA/HDMI/DVI/DisplayPortcabletoyourb.
computer'sVGA/HDMI/DVI/DisplayPortjack.
TightenthetwoscrewstosecuretheVGA/DVIconnector.c.
To use the earphone:• connecttheendwithplugtypetothemonitor’s
earphonejackwhenanHDMIorDisplayPortsignalisfed.
To use the USB 3.0 ports• :TakethesuppliedUSB3.0cable,andplug
thesmallerend(typeB)oftheUSBupstreamcabletothemonitor’sUSB
upstreamport,andthelargerend(typeA)toyourcomputer’sUSB3.0port.
MakesureyourcomputerisinstalledwiththelastestWindows7operating
system.ThatwillenabletheUSBportsonthemonitortowork.
Whenthesecablesareconnected,youcanchoosethedesiredsignal
from the Input Select item in the OSD menu.
2.4 Turning on the monitor
Press the power button .Seepage1-2forthelocationofthepowerbutton.The
power indicator lightsupinwhitetoshowthatthemonitorisON.