User Manual
Table Of Contents
- Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Attaching the arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Adjusting the monitor
- 2.4 Connecting the cables
- 2.5 Turning on the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline Dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
1-3ASUS PA24A Series LCD Monitor
White On
Amber Standby mode
Off Off
1 2 3 4 5 76 8 9
.
. Press the switch to turn on/off power.
. This port connects the power cord.
. These ports are for connection with an HDMI compatible device.
. This port is for connection with a DisplayPort compatible
device.
The default setting of DisplayPort Stream in the OSD menu is DisplayPort
1.2. You can change it to DisplayPort 1.1 when your device output signal is
DisplayPort 1.1.
. This port is for service only.
. This port is for connection with a USB upstream cable. The
connection supports USB power and data delivery.
This monitor is Super-Speed USB 3.0 compatible (5Gbps). The port offers Max.
60W power delivery with output voltage 5V, 9V, 12V, 15V and 20V. Connecting
the USB Type-C cable can input the DisplayPort source, output power and
enable the USB Type-A ports (downstream) on the monitor. Connecting the
USB Type-C to Type-A cable only enables the USB Type-A ports (downstream)
on the monitor.
These ports are for connection with USB devices, such as
USB keyboard/mouse, USB ash drive, etc.
Port with icon is BC1.2 DCP (Dedicated Charging Port) compliant with
Max. 2A. When the USB upstream port is connected to a device, it will only
charge 900mA.
.