User Manual
Table Of Contents
- Contents
- Notices
- Safety information
- Care & Cleaning
- Takeback Services
- Chapter 1: Product introduction
- 1.1 Welcome!
- 1.2 Package contents
- 1.3 Monitor introduction
- Chapter 2: Setup
- 2.1 Attaching the arm/base
- 2.2 Detaching the arm/base (for VESA wall mount)
- 2.3 Adjusting the monitor
- 2.4 Connecting the cables
- 2.5 Turning on the monitor
- Chapter 3: General instructions
- 3.1 OSD (On-Screen Display) menu
- 3.2 Specifications summary
- 3.3 Outline Dimensions
- 3.4 Troubleshooting (FAQ)
- 3.5 Supported operating modes
3-6 Chapter 3: OSD (On-Screen Display) menu
: Adjusts the aspect ratio to Full, 4:3, 1:1, Zoom or
OverScan.
4:3 is only available when input source is in 4:3 format. OverScan is only
available for the HDMI input source.
: Adjusts different areas of the screen to
reduce any screen uniformy errors, providing consistent brightness and
color across the entire screen.
To activate this function, you need to do the following: turn off Dynamic
Dimming. When this function is activated, Blue Light Filter will be automatically
set to OFF.
: Enhances the outline of the displayed picture and generates
high-quality images on screen.
You can adjust Volume, Mute and Source from this menu.
Vo l u me
Mu t e
So u r ce
Sound
ASUS PA2 4 A C
Standard M o d e D i s pl a y P o rt 1 9 20 x 1 20 0 @ 6 0 H z
: the adjusting range is from 0 to 100.
: toggles the monitor sound between on and off.
: decides the monitor sound comes from which source.
The PIP/PBP Setting allows you to open up another sub-window
connected from another video source besides the main-window
from your original video source. By activating this function, the
monitor displays up to 2 pictures from different video sources.
To activate this function, you need to do the following: disable HDR on your
device, turn off Adaptive-Sync and Dynamic Dimming.