Monitor LCD serii PB238TR Podręcznik użytkownika
Spis treści Uwagi .......................................................................................................... iii Informacje związane z bezpieczeństwem.................................................. iv Dbanie i czyszczenie.................................................................................... v 1.1 Witamy!.......................................................................................... 1-1 1.2 Zawartość opakowania....................................................
Uwagi Oświadczenie o zgodności z przepisami Federalna Komisja Łączności Urządzenie to jest zgodne z Częścią 15 przepisów FCC. Jego działanie wymaga spełnienia następujących dwóch warunków: • Urządzenie to nie może powodować żadnych szkodliwych zakłóceń i • Urządzenie to musi akceptować wszelkie odbierane zakłócenia, włącznie z zakłóceniami nieprzewidywalnymi.
Informacje związane z bezpieczeństwem • • • • • • • • • • • • • • • iv Przed wykonaniem ustawień monitora należy uważnie przeczytać całą, dostarczoną w opakowaniu dokumentację. Aby zapobiec pożarowi lub porażeniu prądem elektrycznym, nigdy nie należy narażać monitora na działanie deszczu lub wilgoci. Nigdy nie należy otwierać obudowy monitora. Niebezpieczne, wysokie napięcie wewnątrz monitora może spowodować poważne obrażenia fizyczne. W przypadku uszkodzenia zasilacza nie wolno naprawiać go samemu.
Dbanie i czyszczenie • Przed zmianą pozycji monitora zaleca się odłączenie kabli i przewodu zasilającego. Podczas zmiany pozycji monitora należy stosować właściwe techniki podnoszenia. Podczas podnoszenia lub przenoszenia należy chwycić za krawędzie monitora. Nie należy podnosić monitora za podstawę lub za przewód. • Czyszczenie. Wyłącz monitor i odłącz przewód zasilający. Oczyść powierzchnię monitora pozbawioną luźnych włókien, nie szorstką szmatką.
Gdzie można znaleźć więcej informacji W celu uzyskania dodatkowych informacji i aktualizacji produktu i oprogramowania, sprawdź następujące źródła. 1. Strony sieci web ASUS Ogólnoświatowe strony sieci web ASUS zapewniają zaktualizowane informacje o urządzeniach i oprogramowaniu firmy ASUS. Sprawdź http://www.asus.com 2. Opcjonalna dokumentacja Opakowanie z produktem może zawierać opcjonalną dokumentację, która mogła zostać dodana przez dostawcę. Te dokumenty nie są części standardowego opakowania.
1.1 Witamy! Dziękujemy za zakupienie monitora LCD ASUS® serii PB238TR! Najnowszy szerokoekranowy monitor LCD ASUS zapewnia wyraźny, szerszy i jasny wyświetlacz, plus funkcje zwiększające doznania podczas oglądania. Funkcje te zapewniają wygodę obsługi i wspaniałe wrażenia wizualne, jakie dostarcza monitor serii PB238TR! 1.
1.3 Wprowadzenie do monitora 1.3.1 Przód monitora LCD 1 2 3 4 5 6 1. Czujnik wykrywania ludzi • 2. Przycisk • 1-2 Czujnik obecności ludzi wykryje obecność użytkownika przed ekranem monitora. Przełączy on automatycznie monitor do trybu oszczędzania energii, gdy nie wykryje obecności użytkownika przed monitorem, w efektywnym zakresie odległości 50cm do 70cm, przez dłużej niż 60 sekund. Po powrocie użytkownika i wykryciu jego obecności, zasilanie zostanie wznowione automatycznie.
3. 4. 5. • Użyj ten przycisk skrótu do przełączania pomiędzy sześcioma wstępnie ustawionymi trybami (Scenery Mode (Tryb Sceneria), Standard Mode (Tryb Standardowy), Theater Mode (Tryb Teatr), Game Mode (Tryb Gry), Night View Mode (Tryb Widok nocny) i sRGB Mode (Tryb sRGB)) z technologią inteligentnego poprawiania wideo SPLENDID™. • Wyjście z menu OSD lub przejście z powrotem do poprzedniego menu, przy aktywnym menu OSD.
1.3.2 Tył monitora LCD 1 2 3 4 5 6 7 8 Złącza tylne 1-4 1. Port wejścia prądu zmiennego: Ten port umożliwia podłączenie przewodu zasilającego. 2. Przełącznik zasilania: Naciśnij ten przełącznik, aby włączyć/wyłączyć zasilanie. 3. Port DVI: Ten 24-pinowy port służy do podłączenia sygnału cyfrowego DVI-D dla komputera PC (Komputer osobisty). 4. Port VGA: Ten 15-pinowy port służy do podłączenia VGA komputera PC. 5. Port liniowego wejścia audio: 6.
2.1 Odłączanie wspornika/podstawy (przy montażu ściennym VESA) Odłączana podstawa tego monitora, jest przeznaczona do montażu na ścianie VESA. W celu odłączenia wspornika/podstawy: 1. Odłacz kable zasialnia i sygnałowy. Ostrożnie połóż monitor ekranem w dół na czystym stole. 2. Użyj śrubokręta do odkręcenia czterech śrub na ramieniu (Rysunek 1), a następnie odłącz ramię/podstawę od monitora (Rysunek 2).
2.2 Regulacja monitora • Dla uzyskania optymalnego widzenia, zaleca się, aby spojrzeć na pełny ekran monitora, a następnie wyregulować monitor pod najbardziej wygodnym kątem. • Przytrzymaj podstawę, aby zabezpieczyć monitor przed upadkiem podczas zmiany jego kąta nachylenia. • Kąt nachylenia monitora można regulować w zakresie od +22 do -5, monitor można też przekręcać w lewo lub w prawo o 160. Można także regulować wysokość monitora, w zakresie +/- 11cm.
2.3 Podłączanie kabli Podłącz kable, zgodnie z następującymi instrukcjami: • W celu podłączenia przewodu zasilającego: Podłącz pewnie jeden koniec przewodu zasilającego do portu wejścia prądu zmiennego monitora, a drugi koniec do gniazda zasilania. • Aby podłączyć kabel VGA/DVI: a. Podłącz jeden koniec kabla VGA/DVI do gniazda VGA/DVI monitora. b. Podłącz drugi koniec kabla VGA/DVI do gniazda VGA/DVI komputera. c. Dokręć dwie śruby, aby zamocować złącze VGA/DVI.
3.1 Menu OSD (On-Screen Display (menu ekranowe)) 3.1.1 Jak wykonać ponowną konfigurację PB238 Splendid Scenery Mode Color Standard Mode Image Theater Mode Input Select Game Mode System Setup Night View Mode sRGB Move 3-1 Menu Exit 1. Naciśnij przycisk MENU, aby uaktywnić menu OSD. 2. Naciśnij i w celu przechodzenia pomiędzy funkcjami. Podświetl i uaktywnij wymaganą funkcję, naciskając przycisk MENU.
3.1.2 1. Wprowadzenie do funkcji OSD Splendid Ta funkcja zawiera sześć podfunkcji, które można wybrać według preferencji. Każdy tryb posiada opcję Wyzeruj, która umożliwia zachowanie ustawień lub powrót do trybu ustawień wstępnych.
2. Color (Kolor) Ta funkcja umożliwia wybór preferowanego koloru obrazu. PB238 Splendid Brightness Color Contrast 80 Image Saturation 50 Input Select Color Temp. System Setup Skin Tone 100 User Mode Natural Smart View Move  3-3 Menu OFF Exit • Brightness (Jasność): Zakres regulacji wynosi 0 do 100. Przycisk to także przycisk skrótu do uaktywniania tej funkcji. • Contrast (Kontrast): Zakres regulacji wynosi 0 do 100. • • Saturation (Nasycenie): Zakres regulacji wynosi 0 do 100.
3. Image (Obraz) Tylko ta główna funkcja, umożliwia regulację parametrów Sharpness (Wyostrzenie), Trace Free (Swobodne śledzenie), Aspect Control (Regulacja proporcji), Position (Pozycja) (wyłącznie VGA) i Focus (Ostrość) (tylko VGA). PB238 Splendid Sharpness Color Trace Free 50 Image Aspect Control Full Input Select ASCR OFF System Setup Position 60 Focus Move Menu Exit • Sharpness (Wyostrzenie): Regulacja ostrości obrazu. Zakres regulacji wynosi 0 do 100.
5. Input Select (Wybór wejścia) Wybór źródła wejścia spośród VGA lub DVI. PB238 Splendid VGA Color DVI Image Input Select System Setup Move 6. Menu Exit System Setup (Ustawienia systemu) Regulacja konfiguracji systemu.
• ECO Mode (Tryb ECO): Uaktywnienie trybu ekologicznego w celu oszczędzania energii. (Po włączeniu trybu ECO, niektóre poziomy szarości mogą nie być rozpoznawane. Jasność jest niższa niż przy ustawieniu Contrast Ratio (Współczynnik kontrastu) na 100.) • OSD Setup (Ustawienia OSD): Regulacja H-Position (Pozycja pozioma), V-Position (Pozycja pionowa), OSD Timeout (Czas zakończenia wyświetlania OSD), DDC/CI oraz Transparency (Przezroczystość) ekranu OSD. • Language (Język): Wybór języka OSD.
3.2 Dane techniczne Model Wielkość panelu Maks. rozdzielczość 1920x1080 Jasność (typowy) 250 cd/m2 Rzeczywisty współczynnik kontrastu (typowy) Kąt widzenia (CR=10) 1000:1 178° (w pionie)/178° (w poziomie) Kolory wyświetlacza 16,7 M (6bitowe Hi FRC) Czas odpowiedzi 6ms (Szary do szarego) Głośnik satelitarny 2W x 2 stereo Wyjście słuchawek Wejście DVI Nie DVI z HDCP Wejście D-Sub Tak Liniowe wejście audio Tak Zużycie energii przy włączonym zasilaniu Uwaga Nachylenie Tryb ON (WŁ.
3.3 Rozwiązywanie problemów (FAQ) Problem Możliwe rozwiązanie WŁĄCZONA dioda LED zasilania • Naciśnij przycisk , aby sprawdzić, czy monitor znajduje się w trybie WŁĄCZENIE. • Sprawdź, czy przewód zasilający jest prawidłowo podłączony do monitora i do gniazda zasilania. Pomarańczowe światło diody • Sprawdź, czy monitor i komputer są w trybie LED zasilania i brak obrazu na WŁĄCZENIE. ekranie • Sprawdź, czy kabel sygnałowy jest prawidłowo podłączony do monitora i komputera.
3.