PB278-Serie LCD-Monitor Bedienungsanleitung
Inhalt Hinweise....................................................................................................... iii Sicherheitshinweise.................................................................................... iv Pflege und Reinigung................................................................................... v 1.1 Herzlich willkommen!................................................................... 1-1 1.2 Lieferumfang.............................................................
Hinweise FCC-Hinweis Dieses Gerät erfüllt Teil 15 der FCC-Regularien. Der Betrieb unterliegt den folgenden beiden Voraussetzungen: • Dieses Gerät darf keine Funkstörungen verursachen. • Dieses Gerät muss jegliche empfangenen Funkstörungen hinnehmen, einschließlich Störungen, die zu unbeabsichtigtem Betrieb führen können. Dieses Gerät wurde getestet und als mit den Grenzwerten für Digitalgeräte der Klasse B gemäß Teil 15 der FCC-Regularien übereinstimmend befunden.
Sicherheitshinweise • • • • • • • • • • • • • • • • iv Es empfiehlt sich, vor dem Aufstellen des Monitors die mitgelieferte Dokumentation aufmerksam durchzulesen. Um Brände oder einen Stromschlag zu verhindern, darf der Monitor nicht Regen oder Feuchtigkeit ausgesetzt werden. Versuchen Sie nicht, das Monitorgehäuse zu öffnen. Die gefährliche Hochspannung im Geräteinnern kann zu schweren Verletzungen führen.
Pflege und Reinigung • Vor Hochheben oder Versetzen des Monitors sollten sämtliche Kabel herausgezogen werden. Halten Sie sich beim Aufstellen des Monitors an die Hinweise zum Anheben des Geräts. Fassen Sie das Gerät beim Heben oder Tragen an den Kanten. Heben Sie das Display nicht am Ständer oder am Kabel an. • Reinigung. Schalten Sie den Monitor aus und ziehen Sie das Stromkabel heraus. Reinigen Sie die Oberfläche mit einem fusselfreien, weichen Tuch.
So finden Sie weitere Informationen Folgende Informationsquellen liefern weitere Hinweise sowie Updates für Produkte und Software: vi 1. ASUS-Internetseiten Die Web-Sites des Unternehmens für die einzelnen Länder liefern aktualisierte Informationen über Hardware und Software von ASUS. Die allgemeine Web-Site: http://www.asus.com 2. Weitere Dokumentation Das Gerätepaket enthält u. U. vom Händler beigelegte Zusatzdokumentation. Diese ist nicht Teil des Standardpakets.
1.1 Herzlich willkommen! Vielen Dank, dass Sie diesen ASUS® LCD-Monitor gekauft haben! Dieser neueste Widescreen LCD-Monitor von ASUS verfügt über ein schärferes, breiteres und helleres Display als seine Vorgänger plus eine Reihe von Funktionen, die das Arbeiten mit dem Gerät noch angenehmer und die Darstellung noch natürlicher machen. Diese Funktionen und Merkmale sorgen für die augenfreundliche und brillante Bildwiedergabe des Monitors! 1.
1.3 Monitor montieren So montieren Sie den Monitor: 1. Legen Sie den Monitor flach auf ein auf einem Tisch ausgebreitetes Tuch, montieren Sie die Basis entsprechend der Zeichnung und ziehen die Schraube mit einer Münze fest. 2. Stecken Sie die Kabelklemme in das Loch des Ständers, passen Sie den Monitor auf den für Sie komfortabelsten Winkel an.
1.4 Anschließen der Kabel 1.4.1 Rückseite des LCD-Monitors 8 1 1. Wechselstromeingang 2. DVI-Anschluss 3. HDMI-Port 4. DisplayPort 5. VGA-Anschluss 6. Audioeingang 7. Kopfhörerausgang 8.
1.5 Einführung 1.5.1 Steuertaste verwenden Verwenden Sie die Steuertaste an der Rückseite des Monitors zum Anpassen der Bildeinstellungen. Standardmodus DisplayPort 2560x1440@60Hz Menu QuickFit Eingangswahl Schließen Helligkeit Splendid 7 6 5 4 3 2 1 1. Einschalttaste/Betriebsanzeige: • Taste zum Ein- und Ausschalten des Geräts. • Die Farbe der LED hat folgende Bedeutung: 2. Beschreibung Weiß EIN Gelb Standby-Modus AUS AUS Menütaste: • 3. 1-4 Status Taste zum Aufrufen des OSD-Menüs.
4. Taste für Eingangswahl: • 5. Mit dieser Taste wird zwischen VGA-, DVI-, HDMI/MHL- (nur beim PB278QR) und DisplayPort-Eingangssignal umgeschaltet. Schließen-Taste: • 6. Hiermit verlassen Sie das OSD-Menü. Verknüpfung-Taste 1: • Dies ist eine Verknüpfung-Taste. Die Standardeinstellunge ist Helligkeit. • Dies ist eine Verknüpfung-Taste. Die Standardeinstellunge ist Splendid. 7.
1.5.2 QuickFit-Funktion Die QuickFit-Funktion enthält drei Muster: (1) Gitter (2) Papiergröße (3) Fotogröße. 1. Gittermuster: Vereinfachen Designern und Benutzer die Anordnung von Inhalten und Layout einer Seite; dadurch erhalten sie ein einheitlicheres Aussehen und einen authentischeren Eindruck. Alignment Grid 2. Papiergröße: Ermöglicht Benutzern die Ansicht ihrer Dokumente in Originalgröße auf dem Bildschirm. A4 B5 A4 B5 EXIT 3.
2.1 Abnehmen des Schwenkarms/Fußes (zur VESA-Wandmontage) Der abnehmbare Ständer dieses Monitors wurde speziell zur VESA-Wandmontage entwickelt. Der Schwenkarm/Fuß wird wie folgt abgenommen 1. Ziehen Sie das Stromkabel und die Signalkabel heraus. Legen Sie den Monitor mit der Vorderseite nach vorne auf einen sauberen Tisch. 2. Entfernen Sie die vier Schrauben am Arm mit einem Schraubendreher (Abbildung 1); lösen Sie dann den Arm/Ständer vom Monitor (Abbildung 2).
2.2 Einstellen des Monitors • Für eine optimale Draufsicht sollten Sie direkt auf das Display schauen und dabei den Neigungswinkel des Monitors so einstellen, dass Sie das Display bequehm ansehen können. • Halten Sie den Monitorfuß während der Einstellung des Winkels fest. • Sie können den Monitorwinkel zwischen +20 ° und -5 ° einstellen und um 60 ° nach links oder rechts schwenken. Zudem können Sie die Monitorhöhe um +/- 12cm anpassen. -5° ~ +20° 60° 60° 12cm 0° Monitor drehen 1.
3.1 OSD-Menü (Bildschirmmenü) 3.1.1 Konfiguration PB278 Standardmodus DisplayPort 2560x1440@60Hz Splendid Landschaftsmodus Farbe Standardmodus Bildeinrichtung Theatermodus Klang Spielmodus PIP-/PBP-Einstellung Nachtmodus Eingangswahl sRGBmodus System-Einstellungen Lesemodus Verknüpfung Dunkelkammer-Modus 1. Blenden Sie das OSD-Menü mit der MENU-Taste ein. 2. Drücken Sie zum Umschalten zwischen den Menüoptionen und .
3.1.2 1. Die OSD-Funktionen Splendid Diese Funktion enthält 8 Optionen, die Sie nach Bedarf einstellen können. Alle Modi verfügen über eine Funktion zum Zurücksetzen, d. h., Sie können die Einstellung beibehalten oder zum vordefinierten Modus zurückkehren.
2. Farbe Mit dieser Funktion wählen Sie die gewünschte Bildfarbe. PB278 Standardmodus DisplayPort 2560x1440@60Hz Splendid Helligkeit Farbe Kontrast Bildeinrichtung Sättigung Klang Farbtemp. PIP-/PBP-Einstellung Hautton Eingangswahl System-Einstellungen Verknüpfung • Helligkeit: Möglich sind Werte zwischen 0 und 100. • Kontrast: Möglich sind Werte zwischen 0 und 100. • Sättigung: Möglich sind Werte zwischen 0 und 100. • Farbtemp.
3. Bildeinrichtung Die Optionen dieser Funktion: Schärfe, Trace Free, Seitenverhältnis, VividPixel, ASCR, Position (nur VGA), Fokus (nur VGA) und Auto-Einstellung (nur VGA). PB278 Standardmodus DisplayPort 2560x1440 @ 60Hz 3-4 Splendid Schärfe Farbe Trace Free Bildeinrichtung Seitenverhältnis Klang VividPixel PIP-/PBP-Einstellung ASCR Eingangswahl Position System-Einstellungen Fokus Verknüpfung Auto-Einstellung • Schärfe: Stellt die Bildschärfe ein. Möglich sind Werte zwischen 0 und 100.
4. Klang Hiermit wird der Ton eingestellt. PB278 Standardmodus DisplayPort 2560x1440 @ 60Hz Splendid Lautstärke Farbe Stummschaltung Bildeinrichtung Quelle Klang PIP-/PBP-Einstellung Eingangswahl System-Einstellungen Verknüpfung 5. • Lautstärke: Zum Einstellen der Lautstärke des Ausgangssignals. • Stummschalten: Zum Abstellen des Tons.
• PIP-/PBP-Modus: Zur Auswahl von PIP- oder PBP-Funktion bzw. zum Deaktivieren diese Funktionen. • PIP-/PBP-Quelle: Zur Auswahl der Videoeingangsquelle zwischen „VGA“, „DVI“, „HDMI/MHL“ und „DisplayPort“. • Größe: Zum Anpassen der PIP-Größe auf „Klein“, „Mittel“ oder „Groß“. • Position: Zum Anpassen der Position des PIP-Subfensters auf „Rechts oben“, „Links oben“, „Rechts unten“ oder „Links unten“.
7. System-Einstellungen Funktion zum Einstellen der Systemkonfiguration.
• Bestätigen Sie mit die gewählte Funktion. Drücken Sie zum Zurückkehren . Mit brechen Sie den Vorgang ab und verlassen das Menü. GamePlus-Hauptmenü GamePlus - Zielpunkt GamePlus Zielpunkt Timer (Übungsmodus) GamePlus-Hauptmenü - Timer GamePlus-Hauptmenü - Timer Position Position 3-8 • ECO Mode: Zum Aktivieren des Stromsparmodus. • OSD-Einstellungen: Zum Anpassen von OSD-Abschaltzeit, DDC/CI und Transparenz der Bildschirmanzeige. • Sprache: Zur Auswahl der Sprache für das OSD-Menü.
8. Verknüpfung Durch Auswahl dieser Option können Sie die beiden Verknüpfung-Taste einstellen. PB278 Standardmodus DisplayPort 2560x1440@60Hz Splendid Verknüpfung 1 Splendid Farbe Verknüpfung 2 Helligkeit Bildeinrichtung Auto-Einstellung Klang Kontrast PIP-/PBP-Einstellung PIP-/PBP-Einstellung Eingangswahl Farbtemp.
3.2 Technische Daten Modell PB278Q/PB278QR Panelgröße 27,0 Zoll (68,6 cm) Maximale Auflösung Helligkeit (typisch) Eigenkontrastverhältnis (typisch) Blickwinkel (CR = 10) 300 cd/m2 1000:1 178 ° (V) / 178 ° (H) Anzeigefarben 16,7 M (True 8 bit) Reaktionszeit 5 ms (Grau zu Grau) Satellitenlautsprecher 2 Stck.
3.3 Problembeseitigung (FAQ) Problem Lösungsvorschläge Betriebsanzeige leuchtet nicht. • Drücken Sie , um festzustellen, ob der Monitor eingeschaltet ist. • Vergewissern sich, dass das Netzkabel richtig an Display und Steckdose angeschlossen ist. • Prüfen Sie die Betriebsanzeige-Funktion im Hauptmenü. Wählen Sie zum Einschalten der Betriebs-LED „EIN“. Die Strom-LED leuchtet bernsteinfarben, doch auf dem Display ist nichts zu sehen. • Überprüfen Sie, ob PC und Monitor eingeschaltet sind.
3.
VESA-Modi, vom Benutzer einstellbare Taktwerte Auflösung Wiederholfrequenz Horizontalfrequenz 848 x 480 1280 x 720 (RB) 1280 x 720 1280 x 720 1280 x 768 (RB) 1280 x 800 (RB) 1280 x 800 1280 x 800 1366 x 768 1440 x 900 (RB) 1440 x 900 1680 x 1050 (RB) 1920 x 1080 60 Hz 60 Hz 60 Hz 75 Hz 60 Hz 60 Hz 60 Hz 75 Hz 60 Hz 60 Hz 75 Hz 60 Hz 60 Hz 31,02 44,444 kHz 44,772 kHz 56,456 kHz 47,396 kHz 49,306 kHz 49,702 kHz 62,795 kHz 47,712 kHz 55,469 kHz 70,635 kHz 64,674 kHz 66,587 kHz 60 Hz 88,787kHz WQHD-Modu