User’s Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- 3.1 Removing the bottom cover
- 3.2 Replacing the bottom cover
- 3.3 Removing the top cover
- 3.4 Replacing the top cover
- 3.5 Installing a nano SIM card (Front panel)
- 3.6 Installing an SD card (Top side)
- 3.7 Installing a wireless card to the M.2 slot (Top side)
- 3.8 Installing an mPCIe / mSATA module (Bottom side)
- 3.9 Installing antennas (optional)
- 3.10 Installing the wall mount
- 3.11 Installing DIN rail clips (optional)
- 3.12 Installing the terminal block (optional)
- Chapter 4: Setting up your Embedded Computer
- Appendix
PE100A
17
Layout contents Page
Pico-ITX motherboard
1. Boot Mode switch 18
2. M.2 Wi-Fi slot 19
3. Micro SD card slot 19
4. I2C connector 20
5. SPI TPM connector 20
6. RTC Battery connector 21
7. IO Board-to-Board connector 22
Secondary I/O board
1. IO board switch 23
2. mPCIe / mSATA slot 24
3. Motherboard Board-to-Board connector 25
4. Nano SIM Card slot 26