User’s Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- 3.1 Removing the bottom cover
- 3.2 Replacing the bottom cover
- 3.3 Removing the top cover
- 3.4 Replacing the top cover
- 3.5 Installing a nano SIM card (Front panel)
- 3.6 Installing an SD card (Top side)
- 3.7 Installing a wireless card to the M.2 slot (Top side)
- 3.8 Installing an mPCIe / mSATA module (Bottom side)
- 3.9 Installing antennas (optional)
- 3.10 Installing the wall mount
- 3.11 Installing DIN rail clips (optional)
- 3.12 Installing the terminal block (optional)
- Chapter 4: Setting up your Embedded Computer
- Appendix
PE100A
73
UK: The Radio Equipment Regulations 2017
(S.I. 2017/1206)
Simplified UKCA Declaration of Conformity
ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant
provisions of The Radio Equipment Regulations 2017 (S.I. 2017/1206). Full text of UKCA declaration of conformity is available at
https://www.asus.com/support/.
The WiFi operating in the band 5150-5350MHz shall be restricted to indoor use for country listed below:
UK
UKCA RF Output table (The Radio Equipment Regulations 2017)
AZWAVE (Model: QCA6174A-5)
Function Frequency Maximum Output Power (EIRP)
WiFi
2412 - 2472 MHz 18 dBm
5150 - 5350 MHz 22 dBm
5470 - 5725 MHz 20 dBm
Bluetooth 2402 - 2480 MHz 8 dBm
UKCA RF Output table (The Radio Equipment Regulations 2017)
QUECTEL (Model: EC25-G)
Radio Type Description Frequency Maximum Output Power (EIRP)
900 880 - 915 MHz 35.0 dBm
1800 1710 - 1785 MHz 32.0 dBm
WCDMA
Band 1 1920 - 1980 MHz 25.0 dBm
Band 5 824 - 849 MHz 25.0 dBm
Band 8 880 - 915 MHz 25.0 dBm
LTE
B1 1920 - 1980 MHz 25.0 dBm
B3 1710 - 1785 MHz 25.0 dBm
B5 824 - 849 MHz 25.0 dBm
B7 2500 - 2570 MHz 25.0 dBm
B8 880 - 915 MHz 25.0 dBm
B20 832 - 862 MHz 25.0 dBm
B28 703 - 748 MHz 25.0 dBm
B38 2570 - 2620 MHz 25.0 dBm
B40 2300 - 2400 MHz 25.0 dBm