User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- 3.1 Removing the bottom cover
- 3.2 Replacing the bottom cover
- 3.3 Installing a nano SIM card (optional)
- 3.4 Installing an M.2 (E-key) module
- 3.5 Installing an M.2 (M-key) module
- 3.6 Installing an M.2 (B-key) module
- 3.7 Installing antennas (optional)
- 3.8 Installing wall mount brackets (optional)
- 3.9 Mounting to a surface (optional)
- 3.10 Installing DIN rail clips (optional)
- 3.11 Installing the terminal block (optional)
- Chapter 4: Setting up your Embedded Computer
- Appendix
PE Series
19
Nano SIM card slot
This slot allows you to insert a Nano SIM card.
Force recovery pinhole
The hard reset pinhole allows you to put your Embedded
Computer into Force Recovery Mode to update or flash
the OS.
WWAN wireless antenna jack
The WWAN antenna jack allows you to connect a wireless
antenna to enhance 4G LTE/5G NR signals.
NOTE: The 4G LTE/5G NR wireless antennas are
optional and may not come bundled.