User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- 3.1 Removing the bottom cover
- 3.2 Replacing the bottom cover
- 3.3 Installing a nano SIM card (optional)
- 3.4 Installing an M.2 (E-key) module
- 3.5 Installing an M.2 (M-key) module
- 3.6 Installing an M.2 (B-key) module
- 3.7 Installing antennas (optional)
- 3.8 Installing wall mount brackets (optional)
- 3.9 Mounting to a surface (optional)
- 3.10 Installing DIN rail clips (optional)
- 3.11 Installing the terminal block (optional)
- Chapter 4: Setting up your Embedded Computer
- Appendix
PE Series
23
1.2.2 Internal connectors
1. USB 2.0 connector
The USB 2.0 connector allows you to connect a USB module for
additional USB 2.0 ports. The USB 2.0 connector provides data transfer
speeds of up to 480 MB/s connection speed.
2. M.2 (M-key) slot
The M.2 slot allows you to install an M-key (PCIe, I2C and SMBus) type
2242/2260/2280 M.2 device, such as an M.2 SSD module.
NOTE: The M.2 SSD module is purchased separately.