User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- 3.1 Removing the bottom cover
- 3.2 Replacing the bottom cover
- 3.3 Installing a nano SIM card (optional)
- 3.4 Installing an M.2 (E-key) module
- 3.5 Installing an M.2 (M-key) module
- 3.6 Installing an M.2 (B-key) module
- 3.7 Installing antennas (optional)
- 3.8 Installing wall mount brackets (optional)
- 3.9 Mounting to a surface (optional)
- 3.10 Installing DIN rail clips (optional)
- 3.11 Installing the terminal block (optional)
- Chapter 4: Setting up your Embedded Computer
- Appendix
24
PE Series
3. M.2 (E-key) slot
The M.2 (E-key) slot allows you to install an E-key (PCIe, USB 2.0, I2C,
and PCM), type 2230 M.2 Wi-Fi module.
NOTE: The M.2 Wi-Fi module is purchased separately.
4. M.2 (B-key) slot
The M.2 (B-key) slot allows you to install a B-key (PCIe, USB2.0/3.0) type
3042/3052 M.2 device, such as a 4G LTE, 5G NR, or AEM module.
NOTE: The M.2 4G LTE, 5G NR, or AEM module is purchased separately.