User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- 3.1 Removing the bottom cover
- 3.2 Replacing the bottom cover
- 3.3 Installing a nano SIM card (optional)
- 3.4 Installing an M.2 (E-key) module
- 3.5 Installing an M.2 (M-key) module
- 3.6 Installing an M.2 (B-key) module
- 3.7 Installing antennas (optional)
- 3.8 Installing wall mount brackets (optional)
- 3.9 Mounting to a surface (optional)
- 3.10 Installing DIN rail clips (optional)
- 3.11 Installing the terminal block (optional)
- Chapter 4: Setting up your Embedded Computer
- Appendix
PE Series
29
WARNING!
• Do not use power adapters or batteries from other devices to
reduce the risk of injury to persons due to fire or explosion. Use
only UL certified power adapters or batteries supplied by the
manufacturer or authorized retailers.
• Do not disable or remove the power cord grounding plug, the
grounding is an important safety feature.
• Make sure to plug the power cord into a grounded (earthed)
electrical outlet that is easily accessible at all times.
IMPORTANT!
• We strongly recommend that you use only UL-certified power
adapters and cables that meet the following requirements or ones
that you purchased as an option with your Embedded Computer.
65 W Power adapter
Input voltage: 100-240 Vac
Input frequency: 50-60 Hz
Rated output current: 5.41 A-2.7 A (65.0 W)
Rated output voltage: 12-24 Vdc
System
Rated voltage: 12-24 Vdc
Rated current: 5.41 A-2.7 A (65.0 W)
• We strongly recommend that you use a grounded wall socket while
using your Embedded Computer.
• The socket outlet must be easily accessible and near your
Embedded Computer.
• To disconnect your Embedded Computer from its main power
supply, unplug your Embedded Computer from the power socket.