User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- 3.1 Removing the bottom cover
- 3.2 Replacing the bottom cover
- 3.3 Installing a nano SIM card (optional)
- 3.4 Installing an M.2 (E-key) module
- 3.5 Installing an M.2 (M-key) module
- 3.6 Installing an M.2 (B-key) module
- 3.7 Installing antennas (optional)
- 3.8 Installing wall mount brackets (optional)
- 3.9 Mounting to a surface (optional)
- 3.10 Installing DIN rail clips (optional)
- 3.11 Installing the terminal block (optional)
- Chapter 4: Setting up your Embedded Computer
- Appendix
PE Series
31
2.1.3 Connect the USB cable from keyboard or
mouse
You can connect generally any USB keyboard and mouse to your Embedded
Computer. You can also connect a USB dongle for a wireless keyboard and
mouse set.
To connect a keyboard and mouse to your Embedded Computer:
Connect the USB cable from your keyboard and mouse to any of the USB
ports of your Embedded Computer.
NOTE:
• The keyboard varies with country and/or region.
• The keyboard and mouse are purchased separately.