User’s Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Edge Computer
- Chapter 2: Using your Edge Computer
- Chapter 3: Upgrading your Edge Computer
- 3.1 Removing the bottom cover
- 3.2 Replacing the bottom cover
- 3.3 Installing memory modules
- 3.4 Installing 2.5” storage device
- 3.5 Installing the Mini PCIe card
- 3.6 Installing a nano SIM card
- 3.7 Installing an SD card
- 3.8 Installing the wireless card
- 3.9 Installing an M.2 SSD
- 3.10 Installing the antennas (optional)
- 3.11 Installing the USB 2.0 module (on selected models)
- 3.12 Installing the Serial port module (on selected models)
- 3.13 Installing the PoE LAN module (on selected models)
- 3.14 Installing the VESA mount (optional)
- 3.15 Installing the wall mount
- Chapter 4: BIOS Setup
- 4.1 Getting to know your BIOS
- 4.2 BIOS setup program
- 4.3 Main Menu
- 4.4 Advanced menu
- 4.4.1 Trusted Computing
- 4.4.2 PCH Storage Configuration
- 4.4.3 Onboard Devices Configuration
- 4.4.4 ACPI Settings
- 4.4.5 APM Configuration
- 4.4.6 SMART Settings
- 4.4.7 NCT6116D Super IO Configuration
- 4.4.8 NCT6116D HW Monitor
- 4.4.9 Serial Port Console Redirection
- 4.4.10 CPU Configuration
- 4.4.11 AMI Graphic Output Protocol Policy
- 4.4.12 PCI Subsystem Settings
- 4.4.13 USB Configuration
- 4.4.14 Network Stack Configuration
- 4.4.15 SDIO Configuration
- 4.4.16 Platform Trust Technology
- 4.4.17 Security Configuration
- 4.4.18 Thermal
- 4.5 Security
- 4.6 Boot menu
- 4.7 Save & Exit menu
- 4.8 Updating your BIOS
- Appendix
PE200S Series
75
4.4.4 ACPI Settings
The items in this menu allow you to congure the system ACPI parameters.
Enable ACPI Auto Conguration
Allows you to enable or disable the BIOS ACPI Auto Conguration.
Conguration options: [Disabled] [Enabled]
NOTE: The following item appears only when Enable ACPI Auto
Conguration is set to [Disabled].
Enable Hibernation
Allows you to enable or disable the ability of the system to hibernate (OS/S4
Sleep State).
Conguration options: [Disabled] [Enabled]
IMPORTANT!ThisoptionmaybenotbeeectivewithsomeOS.
ACPI Sleep State
Allows you to select the highest ACPI sleep state the system will enter when
the SUSPEND button is pressed.
Conguration options: [Suspend Disabled] [S3 (Suspend to RAM)]
Lock Legacy Resources
Allows you to enable or disable the Lock of Legacy Resources.
Conguration options: [Disabled] [Enabled]