User’s Manual

80 PE200S Series
NOTE: The following item appears only when Console Redirection is
set to [Enabled].
Console Redirection Settings
This item becomes congurable only when you enable the Console
Redirection item. The settings specify how the host computer and the
remote computer (which the user is using) will exchange data. Both
computers should have the same or compatible settings.
Terminal Type
Allows you to set the terminal type.
[VT100] ASCII char set.
[VT100+] Extends VT100 to support color, function keys, etc.
[VT-UTF8] Uses UTF8 encoding to map Unicode chars onto 1 or more
bytes.
[ANSI] Extended ASCII char set.
Bits per second
Selects serial port transmission speed. The speed must be matched on
theotherside.Longornoisylinesmayrequirelowerspeeds.
Conguration options: [9600] [19200] [38400] [57600] [115200]
Data Bits
Conguration options: [7] [8]
Parity
A parity bit can be sent with the data bits to detect some transmission
errors. [Mark] and [Space] parity do not allow for error detection.
[None] None.
[Even] parity bit is 0 if the num of 1’s in the data bits is even.
[Odd] parity bit is 0 if num of 1’s in the data bits is odd.
[Mark] parity bit is always 1.
[Space] parity bit is always 0.