User’s Manual

PE200S Series 85
NOTE: The following items appear only when Power Limit 1 Enable is
set to [Enabled].
Power Limit 1
Power Limit 1 Clamp Mode
Allows you to enable or disable Power Limit 1 Clamp Mode.
Conguration options: [Disabled] [Enabled]
Power Limit 1 Power
Allows you to set the Power Limit 1 in Watts. Selecting [Auto] will
program Power Limit 1 Power based on the silicon default support
value.
Conguration options: [Auto] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15]
[16] [17] [18] [19] [20] [21] [22] [23] [24] [25]
Power Limit 1 Time Window
Allows you to set the Power Limit 1 Time Window value in Seconds.
Selecting [Auto] will program Power Limit 1 Time Window based on
the silicon default support value.
Conguration options: [Auto] [1] [2] [3] [4] [5] [6] [7] [8] [10] [12] [14]
[16] [20] [24] [28] [32] [40] [48] [56] [64] [80] [96] [112]
Active Processor Cores
Allows you to enable or disable selecting the number of CPU cores to
activate in each processor package.
Conguration options: [Disabled] [Enabled]
NOTE: The following items appear only when Active Processor Cores
is set to [Enabled].
Core 1-3
Allows you to enable or Core 1-3.
Conguration options: [Disabled] [Enabled]