User’s Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Edge Computer
- Chapter 2: Using your Edge Computer
- Chapter 3: Upgrading your Edge Computer
- 3.1 Removing the bottom cover
- 3.2 Replacing the bottom cover
- 3.3 Installing memory modules
- 3.4 Installing 2.5” storage device
- 3.5 Installing the Mini PCIe card
- 3.6 Installing a nano SIM card
- 3.7 Installing an SD card
- 3.8 Installing the wireless card
- 3.9 Installing an M.2 SSD
- 3.10 Installing the antennas (optional)
- 3.11 Installing the USB 2.0 module (on selected models)
- 3.12 Installing the Serial port module (on selected models)
- 3.13 Installing the PoE LAN module (on selected models)
- 3.14 Installing the VESA mount (optional)
- 3.15 Installing the wall mount
- Chapter 4: BIOS Setup
- 4.1 Getting to know your BIOS
- 4.2 BIOS setup program
- 4.3 Main Menu
- 4.4 Advanced menu
- 4.4.1 Trusted Computing
- 4.4.2 PCH Storage Configuration
- 4.4.3 Onboard Devices Configuration
- 4.4.4 ACPI Settings
- 4.4.5 APM Configuration
- 4.4.6 SMART Settings
- 4.4.7 NCT6116D Super IO Configuration
- 4.4.8 NCT6116D HW Monitor
- 4.4.9 Serial Port Console Redirection
- 4.4.10 CPU Configuration
- 4.4.11 AMI Graphic Output Protocol Policy
- 4.4.12 PCI Subsystem Settings
- 4.4.13 USB Configuration
- 4.4.14 Network Stack Configuration
- 4.4.15 SDIO Configuration
- 4.4.16 Platform Trust Technology
- 4.4.17 Security Configuration
- 4.4.18 Thermal
- 4.5 Security
- 4.6 Boot menu
- 4.7 Save & Exit menu
- 4.8 Updating your BIOS
- Appendix
PE200S Series
93
Critical Trip Point
This value controls the temperature of the ACPI Critical Trip Point - the point
inwhichtheOSwillshutthesystemo.
Conguration options: [15 C] [23 C] [31 C] [39 C] [47 C] [55 C] [63 C] [71 C]
[79 C] [87 C] [95 C] [100 C] [103 C] [110 C] [119 C] [125 C]
Passive Trip Point
This value controls the temperature of the ACPI Passive Trip Point - the point
in which the OS will begin throttling the processor.
Conguration options: [95 C] [Disabled [15 C] [23 C] [31 C] [39 C] [47 C]
[55 C] [63 C] [71 C] [79 C] [87 C] [103 C] [111 C]
Active Trip Point
This value controls the temperature of the ACPI Active Trip Point - the point
in which the OS will turn the fan on.
Conguration options: [15 C] [23 C] [31 C] [39 C] [47 C] [55 C] [60 C] [63 C]
[71 C] [79 C] [87 C] [95 C] [103 C] [110 C]
NOTE: Please ignore this item for a Fanless system.