User Manual
Table Of Contents
- About this manual
- Chapter 1: Getting to know your Embedded Computer
- Chapter 2: Using your Embedded Computer
- Chapter 3: Upgrading your Embedded Computer
- 3.1 Removing the bottom cover
- 3.2 Replacing the bottom cover
- 3.3 Installing memory modules
- 3.4 Installing 2.5” storage device
- 3.5 Installing an M.2 SSD
- 3.6 Installing a nano SIM card
- 3.7 Installing an SD card
- 3.8 Installing a wireless card to the M.2 slot
- 3.9 Installing an mPCIe / mSATA module
- 3.10 Installing the antennas (optional)
- 3.11 Installing the USB 2.0 module (on selected models)
- 3.12 Installing the Serial port module (on selected models)
- 3.13 Installing the PoE LAN module (on selected models)
- 3.14 Installing the VESA mount (optional)
- 3.15 Installing the wall mount
- 3.16 Installing DIN rail clips (optional)
- Chapter 4: Using the software
- Chapter 5: Watchdog Timer
- Appendix
PE Series
71
4.2 IEC Vision overview
IEC Vision provides you with a GDPR compliant remote monitoring and
control solution and supports USB cameras and PoE IP cameras.
Camera select and settings:
Select a camera to monitor. You may also add, edit, or delete an IP
camera, or re-name your connected USB cameras or IP cameras.
Widget settings:
Enable or disable the Summary, Age or Gender widgets, or lter
the data displayed on enabled widgets by day, week, or month.
Gender widget:
Displays the daily, weekly, or monthly male / female ratio for
people identied by IEC Vision.
4.2.1 Demographic Mode