User Guide
2-2
第二章：Boot Agent 設置
2.1 開啟 Broadcom NetXtreme Ethernet
Boot Agent 程序
Broadcom NetXtreme Ethernet Boot Agent 提供基於硬件的網卡設置。
請按以下步驟開啟 Broadcom NetXtreme Ethernet Boot Agent 並進入
主畫面。
1. 啟 動系統。在系統自檢（POST）過程 中 ， 當出現以下畫面時按下
<Ctrl+S>。
2. Device List 畫面出現。用上/下箭頭鍵選擇要設置的以太網設備，然後按
下 <Enter>。
Broadcom NetXtreme Ethernet Boot Agent
Copyright (C) 2000-2010 Broadcom Corporation
All rights reserved.
Press Ctrl-S to enter Conguration Menu
Comprehensive Conguration Management v6.2.12
Copyright (C) 2000-2010 Broadcom Corporation
All rights reserved.
<05:00:00> BCM57712 - 20:CF:30:00:00:38 MBA:v6.2.14 CCM:v6.2.12
<05:00:01> BCM57712 - 20:CF:30:00:00:3A MBA:v6.2.14 CCM:v6.2.12
Device List
Select Device to Congure
[Enter]:Enter Next Menu; [↑|↓]:Next Entry; [ESC]:Quit Menu
3. 此時 Main Menu 畫面出現。用上/下箭頭鍵選擇一個項目，然後按下
<Enter>。
Comprehensive Conguration Management v6.2.12
Copyright (C) 2000-2010 Broadcom Corporation
All rights reserved.
MBA Conguration
iSCSI Boot Conguration
NIC Partition Conguration
Main Menu
Congure MBA Parameters
[Enter]:Enter Next Menu; [↑|↓]:Next Entry; [ESC]:Quit Menu
Current Adapter:Primary, Bus=05 Device=00 Func=00, MAC=20:CF:30:00:00:38