User's Manual

3-3ASUS TS500-E5
3.3 Attaching the rails to the rack
To attach the rails to the rack:
1. Select one unit of space (1U) on the rack
where you wish to install the server.
5. Find the rear 1U space that corresponds to the front 1U space where you
attached the rail.
6. Drive in two screws on the outer holes to secure the rear end.
7. From the rack front, nd the corresponding 1U space for the second rail pair.
8. Repeat steps
3–6 to attach the second rail pair.
3. Align the front end holes of a rack
rail pair to the 1U space.
4. Drive in two screws on the outer
holes to secure the front end.
1U space
2. Loosen the two screws on the rack
rails.