TS100-E4/PI2 Pedestal Server User Manual

5-18 Chapter 5: RAID Conguration
When a RAID set is already existing, using the New Conguration com-
mand erases the existing RAID conguration data. If you do not want to
delete the existing RAID set, use the View/Add Conguration command to
view or create another RAID conguration.
3. Follow steps 3 to 7 of the previous section.
4. Select
Size from the Logical Drive menu, then press <Enter>.
5. Key in the desired logical drive size, then press <Enter>.
6. Follow steps 8 to 12 of the previous section to create the RAID set.
Using New Conguration
To create a RAID set using the New Conguration option:
1. From the utility main menu, highlight
Congure, then press <Enter>.
2. Use the arrow keys to select
New Conguration, then press <Enter>.