TS100-E4/PI2 Pedestal Server User Manual

2-21ASUS TS100-E4/PI2

To install a oppy disk drive:

1. Insert the drive to the bay until

it is flushed to the chassis front

panel.

2. Align the FDD screw hole with the

drive bay lock pin.

2.8 Removing components

You may need to remove previously installed system components when

installing or removing other system components, or when replacing a de-

fective component. This section tells how to remove the following compo-

nents:

1. Floppy disk drive (FDD)

2. System fan (Optional)

4. Carefully pull the FDD from the

chassis. Set the FDD aside.

2. Unlock the FDD bay by moving

the drive bay lock toward the

direction of the front panel.

2.8.1 Removing the oppy disk drive

To remove the FDD:

1. Disconnect the FDD power plug and signal cable.

3. Use the screwdriver to release

the screw.