TS100-E4/PI2 Pedestal Server User Manual

3-8 Chapter 3: Motherboard Information

6. Gigabit LAN controller setting [3-pin LAN_EN1)

These jumpers allow you to enable or disable the onboard Broadcom

BCM5721 Gigabit LAN1 controller. Set to pins 1-2 to activate the

Gigabit LAN controller.

7. RAID controller selection (3-pin RAID_SEL1)

This jumper allows you to select the RAID conguration utility to use when

you create disk arrays. Place the jumper caps over pins 1-2 if you want to

use the LSI Logic Embedded SATA RAID Setup Utility (default); other-

wise, place the jumper caps to pins 2-3 to use the Intel

Matrix Storage

Manager.

P5M2-M/C_TS100-E4

P5M2-M/C_TS100-E4 LAN_EN1 Setting

Enable

(Default)

Disable

LAN_EN1

P5M2-M/C_TS100-E4

P5M2-M/C_TS100-E4 RAID_SEL1 Setting

RAID_SEL1

LSI RAID ROM

(Default)

INTEL RAID ROM