TS100-E4/PI2 Pedestal Server User Manual

4-6 Chapter 4: BIOS setup
4.1.3 ASUS CrashFree BIOS 2 utility
The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to
restore the BIOS le when it fails or gets corrupted during the updating
process. You can update a corrupted BIOS le using the motherboard sup-
port CD or the oppy disk that contains the updated BIOS le.
Recovering the BIOS from a oppy disk
To recover the BIOS from a oppy disk:
1. Turn on the system.
2. Insert the oppy disk with the original or updated BIOS le to the oppy
disk drive.
3. The utility displays the following message and automatically checks the
oppy disk for the original or updated BIOS le.
BadBIOSchecksum.StartingBIOSrecovery...
Checkingforoppy...
4. Restart the system after the utility completes the updating process.
BadBIOSchecksum.StartingBIOSrecovery...
Checkingforoppy...
Floppy found!
Readingle“TS100-E4.ROM”.Completed.
Startashing...
When found, the utility reads the BIOS le and starts ashing the corrupted
BIOS le.
DO NOT shut down or reset the system while updating the BIOS! Doing
so can cause system boot failure!
• Prepare the motherboard support CD or the oppy disk containing
the updated motherboard BIOS before using this utility.
• Make sure that you rename the original or updated BIOS le in the
oppy disk to TS100-E4.ROM.