User Manual
Table Of Contents
- Mellanox WinOF VPI User Manual
- Table of Contents
- List of Tables
- Document Revision History
- About this Manual
- 1 Introduction
- 2 Driver Features
- 3 Deploying Windows Server 2012 with SMB Direct
- 4 Driver Configuration
- 5 Performance Tuning
- 6 OpenSM - Subnet Manager
- 7 InfiniBand Fabric
- 7.1 Network Direct Interface
- 7.2 part_man - Virtual IPoIB Port Creation Utility
- 7.3 InfiniBand Fabric Diagnostic Utilities
- 7.4 InfiniBand Fabric Performance Utilities
- 7.4.1 ib_read_bw
- 7.4.2 ib_read_lat
- 7.4.3 ib_send_bw
- 7.4.4 ib_send_lat
- 7.4.5 ib_write_bw
- 7.4.6 ib_write_lat
- 7.4.7 ibv_read_bw
- 7.4.8 ibv_read_lat
- 7.4.9 ibv_send_bw
- 7.4.10 ibv_send_lat
- 7.4.11 ibv_write_bw
- 7.4.12 ibv_write_lat
- 7.4.13 ibaddr
- 7.4.14 ibcacheedit
- 7.4.15 iblinkinfo
- 7.4.16 ibqueryerrors
- 7.4.17 ibsysstat
- 7.4.18 perfquery
- 7.4.19 saquery
- 7.4.20 smpdump
- 8 Software Development Kit
- 9 Troubleshooting
- 10 Documentation
Rev 4.3
Mellanox Technologies
9
Documentation Conventions
Common Abbreviations and Acronyms
Table 2 - Documentation Conventions
Description Convention Example
File names file.extension
Directory names directory
Commands and their parameters command param1 mts3610-1 > show hosts
Required item < >
Optional item [ ]
Mutually exclusive parameters { p1, p2, p3 } or {p1 | p2 |
p3}
Optional mutually exclusive parame-
ters
[ p1 | p2 | p3 ]
Variables for which users supply spe-
cific values
Italic font enable
Emphasized words Italic font These are emphasized words
Note <text> This is a note..
Warning <text> May result in system instabil-
ity.
Table 3 - Abbreviations and Acronyms (Sheet 1 of 2)
Abbreviation /
Acronym
Whole Word / Description
B (Capital) ‘B’ is used to indicate size in bytes or multiples of bytes
(e.g., 1KB = 1024 bytes, and 1MB = 1048576 bytes)
b (Small) ‘b’ is used to indicate size in bits or multiples of bits (e.g.,
1Kb = 1024 bits)
FW Firmware
HCA Host Channel Adapter
HW Hardware
IB InfiniBand